Руководство Metabo KT 18 LTX 66 BL Циркулярная пила

Руководство

ENGLISHen

14

take corrective actions to eliminate the cause of

blade binding.

c) When restarting a saw in the workpiece,

centre the saw blade in the kerf so that the saw

teeth are not engaged into the material. If a saw

blade binds, it may walk up or kickback from the

workpiece as the saw is restarted.

d) Support large panels to minimise the risk of

blade pinching and kickback. Large panels tend

to sag under their own weight. Supports must be

placed under the panel on both sides, near the line

of cut and near the edge of the panel.

e) Do not use dull or damaged blades.

Unsharpened or improperly set blades produce

narrow kerf causing excessive friction, blade

binding and kickback.

f) Blade depth and bevel adjusting locking

levers must be tight and secure before making

the cut. If blade adjustment shifts while cutting, it

may cause binding and kickback.

g) Use extra caution when sawing into existing

walls or other blind areas. The protruding blade

may cut objects that can cause kickback.

4.3 Guard function

a) Check the guard for proper closing before

each use. Do not operate the saw if the guard

does not move freely and enclose the blade

instantly. Never clamp or tie the guard so that

the blade is exposed. If the saw is accidentally

dropped, the guard may be bent. Check to make

sure that the guard moves freely and does not touch

the blade or any other part, in all angles and depths

of cut.

b) Check the operation and condition of the

guard return spring. If the guard and the spring

are not operating properly, they must be

serviced before use. The guard may operate

sluggishly due to damaged parts, gummy deposits,

or a build-up of debris.

c) Assure that the base plate of the saw will not

shift while performing a “plunge cut”. Blade

shifting sideways will cause binding and likely kick

back.

d) Always observe that the guard is covering

the blade before placing the saw down on

bench or floor. An unprotected, coasting blade will

cause the saw to walk backwards, cutting whatever

is in its path. Be aware of the time it takes for the

blade to stop after switch is released.

4.4 Additional safety instructions

Do not use any abrasive wheels.

Keep hands away from the rotating tool! Remove

debris and similar material only when the machine

is at a standstill.

Wear a suitable dust protection mask.

Wear ear protectors.

Wear protective goggles.

Only turn the lever (14) with the battery pack

removed and the motor section pivoted up

completely.

Do not reduce the speed of the saw blade by

pressing on the sides.

The movable motor section must move freely,

automatically, easily and exactly back into its end

position. It must not be clamped in place for sawing.

When sawing materials that generate large

quantities of dust, the machine must be cleaned

regularly. Make sure that the safety appliances, e.g.

the movable motor section, are in perfect working

order.

Materials that generate dusts or vapours that may

be harmful to health (e.g. asbestos) must not be

processed.

Check the workpiece for foreign bodies. When

working, always make sure that no nails or other

similar materials are being sawed into.

If the saw blade blocks, turn the motor off

immediately.

Do not try to saw extremely small workpieces.

During machining, the workpiece must be firmly

supported and secured against moving.

Clean gummy or glue-contaminated saw

blades. Contaminated saw blades cause

increased friction, jamming of the saw blade and

increase the risk of back-kicks.

Avoid overheating of the saw tooth tips. Avoid

melting of the material when sawing plastic.

Use a saw blade that is suitable for the material

being sawn.

For cleaning (e.g. the extraction channel) switch the

machine off, wait until the saw blade comes to a

standstill and remove the battery pack.

If the machine is defective, remove the battery pack

from the machine.

Protect battery packs from water and

moisture!

Do not use faulty or deformed battery packs!

Do not expose battery packs to fire!

Do not open battery packs!

Do not touch or short circuit battery pack contacts!

Remove the battery pack from the machine

when not in use.

Remove the battery pack from the machine

before any adjustment or maintenance is

carried out.

Before fitting the battery pack, make sure that

the machine is switched off.

A slightly acidic, flammable fluid may leak

from defective Li-ion battery packs!

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Metabo KT 18 LTX 66 BL Циркулярная пила. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Metabo. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Metabo KT 18 LTX 66 BL Циркулярная пила на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Metabo Циркулярные пилы
Больше руководств Циркулярные пилы

Часто задаваемые вопросы о Metabo KT 18 LTX 66 BL Циркулярная пила

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Metabo KS 55 FS Циркулярная пила

Руководство

Metabo KS 55 Циркулярная пила

Руководство

Rodex RDX3881 Циркулярная пила

Руководство

Rodex RDX110 Циркулярная пила

Руководство

Skil 5830 DA Циркулярная пила

Руководство

Вихрь ДП-210/2000 Циркулярная пила

Руководство

Вихрь ДП-160/1300 Циркулярная пила

Руководство

Makita DSS610 Циркулярная пила

Связанные категории