Руководство Metabo KT 18 LTX 66 BL Циркулярная пила

Руководство

ENGLISH en

13

Original instructions

We declare and accept sole responsibility for

ensuring: these cordless plunge type circular saws

identified by their type and serial number *1)

conform to all relevant provisions of the directives

*2) and standards *3). Technical documents for *4)

- see page 4.

For UK only:

We as manufacturer and authorized person to

compile the technical file, see *4) on page 4,

hereby declare under sole responsibility that these

cordless plunge type circular saws, identified by

type and serial number *1) on page 4, fulfill all

relevant provisions of following UK Regulations S.I.

2016/1091, S.I. 2008/1597, S.I. 2012/3032 and

Designated Standards EN 62841-1:2015, EN

62841-2-5:2014, EN IEC 63000:2018

The cordless plunge type circular saw is suitable for

sawing wood, plastics and other similar materials. It

must not be used for sawing metals, except for thin

aluminium sheets (thinner than 2 mm) and

aluminium-laminated wooden or composite boards.

The user bears sole responsibility for any damage

caused by inappropriate use.

Generally accepted accident prevention

regulations and the enclosed safety information

must be observed.

For your own protection and for the

protection of your power tool, pay

attention to all parts of the text that are

marked with this symbol!

WARNING – Read the operating

instructions to reduce the risk of injury.

WARNING – Read all safety warnings,

instructions, illustrations and

specifications provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

Keep all safety instructions and information for

future reference.

Always include these documents when passing on

your power tool.

4.1 Cutting procedures

a) DANGER: Keep hands away from

cutting area and the blade. Keep your

second hand on auxiliary handle, or motor

housing. If both hands are holding the saw, they

cannot be cut by the blade.

b) Do not reach underneath the workpiece. The

guard cannot protect you from the blade below the

workpiece.

c) Adjust the cutting depth to the thickness of

the workpiece. Less than a full tooth of the blade

teeth should be visible below the workpiece.

d) Never hold the workpiece in your hands or

across your leg while cutting. Secure the

workpiece to a stable platform. It is important to

support the work properly to minimise body

exposure, blade binding, or loss of control.

e) Hold the power tool by insulated gripping

surfaces, when performing an operation where

the cutting tool may contact hidden wiring or

its own cord. Contact with a "live" wire will also

make exposed metal parts of the power tool "live"

and could give the operator an electric shock.

f) When ripping, always use a rip fence or

straight edge guide. This improves the accuracy

of cut and reduces the chance of blade binding.

g) Always use blades with correct size and

shape (diamond versus round) of arbour holes.

Blades that do not match the mounting hardware of

the saw will run off-centre, causing loss of control.

h) Never use damaged or incorrect blade

washers or bolt. The blade washers and bolt were

specially designed for your saw, for optimum

performance and safety of operation.

4.2 Kickback causes and related warnings

- kickback is a sudden reaction to a pinched,

jammed or misaligned saw blade, causing an

uncontrolled saw to lift up and out of the workpiece

toward the operator;

- when the blade is pinched or jammed tightly by the

kerf closing down, the blade stalls and the motor

reaction drives the unit rapidly back toward the

operator;

- if the blade becomes twisted or misaligned in the

cut, the teeth at the back edge of the blade can dig

into the top surface of the wood causing the blade

to climb out of the kerf and jump back toward the

operator.

Kickback is the result of saw misuse and/or

incorrect operating procedures or conditions and

can be avoided by taking proper precautions as

given below.

a) Maintain a firm grip with both hands on the

saw and position your arms to resist kickback

forces. Position your body to either side of the

blade, but not in line with the blade. Kickback

could cause the saw to jump backwards, but

kickback forces can be controlled by the operator, if

proper precautions are taken.

b) When blade is binding, or when interrupting

a cut for any reason, release the trigger and

hold the saw motionless in the material until

the blade comes to a complete stop. Never

attempt to remove the saw from the work or

pull the saw backward while the blade is in

motion or kickback may occur. Investigate and

1. Declaration of Conformity

2. Specified Conditions of Use

3. General Safety Information

4. Special safety instructions

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Metabo KT 18 LTX 66 BL Циркулярная пила. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Metabo. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Metabo KT 18 LTX 66 BL Циркулярная пила на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Metabo Циркулярные пилы
Больше руководств Циркулярные пилы

Часто задаваемые вопросы о Metabo KT 18 LTX 66 BL Циркулярная пила

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Metabo KS 55 FS Циркулярная пила

Руководство

Metabo KS 55 Циркулярная пила

Руководство

Rodex RDX3881 Циркулярная пила

Руководство

Rodex RDX110 Циркулярная пила

Руководство

Skil 5830 DA Циркулярная пила

Руководство

Вихрь ДП-210/2000 Циркулярная пила

Руководство

Вихрь ДП-160/1300 Циркулярная пила

Руководство

Makita DSS610 Циркулярная пила

Связанные категории