Руководство Elica Stripe WH/A/80 Connex Кухонная вытяжка

Руководство

T1 = ON (Speed 1) - OFF (motor) key - Exclusion of

electronics (Cleaning mode).

- Exclusion of electronics (Cleaning mode)

This function can be useful when cleaning the product.

With the hood switched off, press T1 for 2 seconds and it

will start flashing quickly, while the other keys will start

flashing slowly (electronics excluded).

To switch the electronics back on, press T1 for 2 seconds.

When the Cleaning mode function is active, only the

Lights key can be used (T5).

T2 = ON (Speed 2) - OFF (motor) key

T3 = ON (Speed 3) - OFF (motor) key

T4 = ON (Intensive Speed) - OFF (motor) key

Intensive: it lasts 5 minutes, after which it goes back to the

previously selected setting. It is possible to exit this mode

by pressing any button.

T5 = Light ON/OFF and Light intensity adjustment

(Dimmer) key.

- Light intensity adjustment (Dimmer): with the light on, if

you press T5 for more than 2 seconds, an acoustic signal

followed by the flashing of the LED will allow you to adjust

the intensity of the light evenly and calibrated to the work

surface.

T6 = Bluetooth function key.

The function is activated only with a hob compatible with

the hood. For pairing, see the “Assembly and Use”

manual of the Hob.

T7 = Wi-Fi connectivity key.

- Delayed switch-off of the hood (Delay switch off):

Attention! This function is available only if the product is

NOT connected to the Elica Cloud.

It is possible to set the delayed switch-off of the hood

(OFF) by pressing once again the key of the extraction

speed (power), active at that time with the LED flashing

slowly, for more than 2 seconds, after which the hood

switches off.

The available delayed switch-off times are:

T1= Extraction speed (power) 20 minutes

T2= Extraction speed (power) 15 minutes

T3= Extraction speed (power) 10 minutes.

Please note!

- Briefly pressing the key set to delay switch off switches

off the hood.

- Briefly pressing any key other than the key set to delay

switch off, activates the set extraction speed.

- By long-pressing the key set to delay switch off, the

hood maintains the speed but without timing.

Note: (only for products with Wi-Fi function): the delay

switch off can be programmed in a more advanced way,

when connected to the Elica Cloud, via the Elica Connect

App.

CONTROLLING THE PRODUCT VIA BLUETOOTH (T6)

It is a protocol for the interconnection of electronic devices

by means of radio waves instead of cables (for pairing, see

the “Assembly and Use” manual of the Hob).

CONTROLLING THE PRODUCT VIA Wi-Fi (T7)

This feature allows the product to be controlled from a

mobile device, even when away from home. To use the

product via Wi-Fi, it is necessary to download the Elica

Connect App and follow the instructions given.

- Wi-Fi Configuration:

Follow the instructions provided in the Elica Connect App

for the Wi-Fi configuration. During the configuration

procedure, the LED of key T7 will light up indicating the

connectivity status (see the Wi-Fi status table below).

To interrupt or reactivate the Wi-Fi configuration procedure,

press T7 for 6 seconds.

- Wi-Fi configuration reset:

This operation is used to reset the product to the factory

configuration.

Press T7 for 6 seconds; the status will be “not configured”

and the LED of key T7 will go out.

Note: The password and all other settings made from the

Elica Connect App will be reset and will need to be set

again.

- Wi-Fi On/Off:

after the configuration, the Wi-Fi can be switched on / off.

Press T7 for 2 seconds.

Note: switching off the Wi-Fi with this procedure does not

result in the loss of the previously saved parameters.

Wi-Fi status table

T7 LED Wi-Fi Status

Light off Wi-Fi not configured or off

Orange light fla-

shing fast

Entering the router credentials.

Attention: there is a maximum time

limit of 5 minutes to enter the cre-

dentials.

Steady orange light

Attempt to connect to the Wi-Fi rou-

ter

White light flashing

slowly

Attempt to connect to the Elica

Cloud

White light on stea-

dy

Wi-Fi connected

White light on with

short flashing light

Command received from Elica

Cloud App: motor on or light on,

etc.

Filter saturation indicator

The hood indicates when maintenance is needed for the



Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Elica Stripe WH/A/80 Connex Кухонная вытяжка. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Elica. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Elica Stripe WH/A/80 Connex Кухонная вытяжка на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Elica Кухонные вытяжки
Больше руководств Кухонные вытяжки

Часто задаваемые вопросы о Elica Stripe WH/A/80 Connex Кухонная вытяжка

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Elica See You BL/A/90 Кухонная вытяжка

Руководство

Elica Seashell WH/F/80 Кухонная вытяжка

Руководство

Elica Plat BL/F/80 Кухонная вытяжка

Руководство

Elica Stripe WH/A/60 Connex Кухонная вытяжка

Руководство

Elica Elle BL/F/80 Кухонная вытяжка

Руководство

Elica Lane BL MAT/A/72 Кухонная вытяжка

Руководство

Elica Stripe 60 X Кухонная вытяжка

Руководство

Elica Seashell WH MAT/F/80 Кухонная вытяжка

Связанные категории