Руководство Casals VSC65 Циркулярная пила

Руководство

3

Circular Saw

VSC65

Dear Customer,

Many thanks for trusting to Casals.

Thanks to its continuous effort, our innovation and the

strictest quality controls, Casals develops electric Power

Tools for the toughest jobs.

Read these ORIGINAL instructions carefully before

switching on the appliance and keep them for future ref-

erence. Failure to follow and observe these instructions

could lead to an accident.

GENERAL POWER TOOLS SAFETY WARNING

WARNING Read all safety warnings and all in-

structions. Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

The term “power tool” in the warnings refers to your main-

soperated (corded) power tool or battery-operated (cord-

less) power tool.

Work Area Safety

- Keep the working area clean and well lit. Cluttered and

dark areas invite accidents.

- Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable liquids,

gases or dust. Power tools create sparks which may ig-

nite the dust or fumes

- Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control

- CAUTION: In order to prevent overheating do not cover

the appliance.

- Ensure that neither the air access nor exit become either

totally or partially covered by drapery, clothing, etc., as this

increases the risk of re.

Electric safety

-

Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs and matching out-

lets will reduce risk of electric shock

- Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges or refrigerators. There is

an increased risk of electric shock if your body is earthed or

grounded

- Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock

- Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock

- When operating the power tool outdoors, use an extension

cord suitable for outdoor use. Use a cord suitable for outdoor

use reduces the risk of electric shock

- If operating a power tool in a damp location is unavoidable,

use a residual current device (RCD) protected supply. Use

of an RCD reduces the risk of electric shock

- Do not use the appliance if the cable or plug is damaged.

- Ensure that the voltage indicated on the rating label matches

the mains voltage before plugging in the appliance.

- Only use the appliance with the specic electric connector

provided.

- If any of the appliance casings breaks, immediately disconnect

the appliance from the mains to prevent the possibility of an

electric shock.

- Do not use the appliance if it has fallen on the oor, if there are

visible signs of damage or if it has a leak.

- CAUTION: Maintain the appliance dry.

- CAUTION: Do not use the appliance near water.

- Do not use the appliance with damp hands or feet, or when

barefooted.

- Do not wrap the power cord around the appliance.

- Do not clip or crease the power cord.

- Check the state of the power cord. Damaged or tangled cables

increase the risk of electric shock.

- Do not touch the plug with wet hands.

Personal safety

-

Stay alert, Watch you are doing and use common sense

when operating a power tool. Do not use a power tool while

you are tired or under the inuence of drugs, alcohol or

medication. A moment of inattention while operating power

tools may result in serious personal injury

- Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for appropri-

ate conditions will reduce personal injuries.

- Prevent unintentional starting. Ensure the switch is in the

off-position before connecting the power source and/or

battery pack, picking up or carrying the tool. Carrying power

tools with your finger on the switch or energizing power tools that

have the switch on invites accidents

- Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating part

of the power tool may result in personal injury

- Do not overreach. Keep proper footing and balance at

all times. - This enables better control of the power tool in

unexpected situations

- Dress properly. Do not wear loose clothing or jewellery. Keep

your hair, clothing and gloves away from moving parts.

Loose

English

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Casals VSC65 Циркулярная пила. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Casals. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Casals VSC65 Циркулярная пила на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Casals Циркулярные пилы
Больше руководств Циркулярные пилы

Часто задаваемые вопросы о Casals VSC65 Циркулярная пила

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Casals CCS190L Циркулярная пила

Руководство

Rodex RDX3821 Циркулярная пила

Руководство

Зенит ZPC-2300 Циркулярная пила

Руководство

Интерскол ДП-210/1900М Циркулярная пила

Руководство

Skil 3540 FA Циркулярная пила

Руководство

Redverg RD-CS150-66L Циркулярная пила

Руководство

Redverg RD-CS130-55 Циркулярная пила

Руководство

Alteco CS 0510 Циркулярная пила

Связанные категории