4
clothes, jewellery or long hair can be caught in moving parts.
- If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
- Ensure that the resulting sparks not become dangerous,
for example, that they don’t reach people or ignite ammable
substances.
- If it’s necessary, use temperature-proof gloves.
- Use clamps or a vise to secure the object to be worked in
place. The work will be safer if both hands are free to control
the tool.
- Before using the appliance check the working speed shown
in the disc/ tool is equal or greater than the appliance’s speed.
- Before using the appliance check the disc / tool dimensions are
compatible for this appliance.
- Before using the appliance ensure that the disc / tool is
properly xed in place.
- Do not touch any of the appliance’s moving parts while it is
operating.
- Protect yourself from contact with and the inhalation of dust
created by sanding wood and metal surfaces and surfaces
coated with lead paint. Use protective equipment that complies
with the appropriate health and safety regulations.
- Exercise precaution after employing the stop operation on the
appliance as the tool will continue moving from the effect of its
own mechanical inertia.
Power tool use and care
-Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed
-Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired
-Disconnect the plug from the power source and/or
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally
-Store idle power tool out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users
-Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools
-Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control
renders the guarantee and the manufacturer’s liability null
and void.
Circular saws Safety Warnings
Cutting procedures
DANGER: Keep hands away from cutting area and the
blade. Keep your second hand on auxiliary handle, or mo-
tor housing. If both hands are holding the saw, they cannot be
cut by the blade.
-Do not reach underneath the workpiece. The guard cannot
protect you from the blade below the workpiece.
- Adjust the cutting depth to the thickness of the workpiece.
Less than a full tooth of the blade teeth should be visible below
the workpiece.
- Never hold piece being cut in your hands or across your
leg. Secure the workpiece to a stable platform. It is important
to support the work properly to minimize body exposure, blade
binding, or loss of control.
- Hold the power tool by insulated gripping surfaces only,
when performing an operation where the cutting tool may
contact hidden wiring or its own cord. Contact with a “live”
wire will also make exposed metal parts of the power tool “live”
and could give the operator an electric shock.
-When ripping, always use a rip fence or straight edge
guide. This improves the accuracy of cut and reduces the
chance of blade binding.
-Always use blades with correct size and shape (diamond
versus round) of arbour holes. Blades that do not match the
mounting hardware of the saw will run eccentrically, causing
loss of control.
-Never use damaged or incorrect blade washers or bolt. The
blade washers and bolt were specially designed for your saw, for
optimum performance and safety of operation.
- Do not use abrasive wheels
- Only use blade diameter(s) in accordance with the markings
over the appliance
- Only use saw blades recommended by manufacturer.
Kickback causes and related warnings
- kickback is a sudden reaction to a pinched, bound or
misaligned saw blade, causing an uncontrolled saw to lift
up and out of the workpiece toward the operator;
- when the blade is pinched or bound tightly by the kerf
closing down, the blade stalls and the motor reaction drives
the unit rapidly back toward the operator;
- if the blade becomes twisted or misaligned in the cut, the
teeth at the back edge of the blade can dig into the top
surface of the wood causing the blade to climb out of the
kerf and jump back toward the operator. Kickback is the
result of saw misuse and/or incorrect operating procedures
or conditions and can be avoided by taking proper
precautions as given below.
-Use the power tool, accessories and tool bits etc in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those intended could
result in a hazardous situation.
- Fully unroll the appliance’s power cable before each use.
- Check the position of power cables before commencing work
ensuring they are well away from the work area.
- Do not use the appliance if the parts or accessories are not
properly tted.
- Do not use the appliance if the accessories or consumables
attached to it are defective. Replace them immediately.
- Use the appliance handle/s, to catch it or move it.
- Disconnect the appliance from the mains when not in use and
before undertaking any cleaning task.
- Unplug the appliance from the mains before replacing any
accessory.
- Unplug the appliance from the mains when not in use and
before undertaking any cleaning task.
- This appliance is for household use only, not professional,
industrial use.
- This appliance is intended for adult use. Ensure that this
product is not used by the disabled, children or people unused
to its handling.
- This appliance is not a toy. Children should be supervised to
ensure that they do not play with the appliance.
- Do not expose the appliance to extreme temperatures.
- Take special care about discs and tools, they may be stored
xed on the appliance and used according to the manufacturer’s
instructions.
- Do not use separator or reducing bushings, adapters to x the
discs / tools they are not directly compatible with the appliance.
- Keep the appliance in a dry, dust-free place, out of direct
sunlight.
- Always check the workpiece before operation and remove any
obstructions such as nails, staples, screws, string, rags, cloths
and other debris.
- Do not use the appliance on any part of the body of a person
or animal.
- Let the appliance running with no load for 30 seconds in a safe
position. If you notice serious vibration or other defects stop the
appliance immediately. Then check the problem and /or proceed
as we describe on Anomalies and Repair clause.
Service
- Have your power tool serviced by a qualied repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained
Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer’s liability null
and void.
- Any misuse or failure to follow the instructions for use
Присоединиться к беседе по данному изделию
Здесь вы можете поделиться тем, что думаете о Casals VSC65 Циркулярная пила. Если у вас есть вопросы, сначала внимательно прочтите инструкцию. Запросить руководство можно с помощью контактной формы.