Руководство Thomson ROC1117GRU Пульт дистанционного управления

Руководство

3

GB

LED indicator conrms each entered digit

by ashort ash and turns off after 3valid

digits. Otherwise, the LED will ash

3times and then remain on for re-entry.

3. Please try to use the remote control.

lf it doesn‘t work well, please try other

codes: [002], [003], [004] ...

Note

•Noentry for approx. 15 seconds will time

out the set-up mode.

•Ifthe code is invalid, the LED ashes

3times and then lights up permanently.

•Toexit the setup, please press the

[MUTE] key.

5.2 MANUAL CODE SEARCH

1. Press and hold [MUTE] and [POWER]

keys for approx. 3seconds until the LED

will be lit.

2. Press and release [P+] or [P-] key to start

searching the code. Each time you press,

the remote will change to the next code.

3. Please test if the [POWER], [VOL+],

[MENU], [0-9] keys work well. If ok,

please press the [MUTE] key to save the

code and exit.

4. If it doesn‘t work well, repeat the fast

search by pressing the [P+] or [P-] key.

Note

At the set-up mode, only the [POWER],

[VOL+], [MENU], [0-9] keys areworking.

5.3

CODE INQUIRY

Use the following method to nd out which

code is currently set:

1. Press and hold [MUTE] and [POWER]

keys for approx. 3seconds until the LED

will be lit.

2. Enter the code [9] [9] [0] (The LED will

ash once for each enter) with the

number keys. The LED will ash twice

and goes off.

3. Press the key [1] for the 1st digit of the

code. The LED will start to ash.

Count the LED ashes. The number of

ashes resemble the code‘s rst digit.

Repeat this procedurefor the 2nd and

3rddigit of the code:

2nd digit -> press the key [2] -> count

LED ashes

3rddigit -> press the key [3] -> count

LED ashes

If code number is 0the LED will not ash.

After the LED has indicated the thirddigit

it will turn off.

5.4 Compatible Remote Control Model

Due to too many Remote Control models, we

only Iist some of them below. lf your remote

control is similar to the drawing, the replacement

remote can control your TV (Page 74).

6. LEARN MODE

This remote control is equipped with alearning

function. Thus, you could learn functions of

your original remote to this remote control.

6.1 BEFORE STARTING LEARN MODE

•The batteries in the two remote controls

have to be in good condition. Replace them

if necessary.

•Place the remote controls with the infrared

diodes so that they point towards each

other.

•Wherenecessary adjust the height of both

remotes so that infrared diodes areproperly

aligned.

•The distance between the remote controls

should be about 3cm.

ca. 3cm

ROC1117GRU

ORIGINAL

Note

•Donot move the remote controls during

the learning procedure.

•E

nsur

et

hat

the

ro

om

is

not

lit

by

uor

escents

tubes

or

low

ener

gy

consumption

lamps

since

such

light

sour

ces

could

interfer

ew

ith

the

copying.

•The 2remotecontrols must be at least

1meter away from any light source.

•During learning mode, if no key is

selected for morethan 15 seconds, the

learning mode will exit automatically or

if no other remote signal is received.

•Each function key will hold only one

command. Anew command to be learned

will automatically replace the previous one.

6.2 ENTER LEARN MODE

1. Press and hold the [MUTE] and [VOL+]

keys for approx. 3seconds until the LED

will be lit.

2. Enter the code [9] [8] [0], the LED will ash

2times and then remain on.

3. The remote control is now ready to learn

new commands.

6.3 LEARNING OF KEYS

1. Press and release the desired key on the

original remote control which you want the

command to be learned. The LED at your

replacement remote will ash to conrm

that the information has been received.

2. Then press and release the target key on

the remote control you want learned.

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Thomson ROC1117GRU Пульт дистанционного управления. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Thomson. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Thomson ROC1117GRU Пульт дистанционного управления на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Thomson Пульты дистанционного управления
Больше руководств Пульты дистанционного управления

Часто задаваемые вопросы о Thomson ROC1117GRU Пульт дистанционного управления

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Thomson ROC6309 Пульт дистанционного управления

Руководство

Thomson ROC1128PHI Пульт дистанционного управления

Руководство

Thomson ROCZ309 Пульт дистанционного управления

Руководство

Thomson ROC4309 Пульт дистанционного управления

Руководство

Thomson ROC4206 Пульт дистанционного управления

Руководство

Thomson ROC1128SAM Пульт дистанционного управления

Руководство

Thomson ROC4411 Пульт дистанционного управления

Руководство

Thomson ROC1117SON Пульт дистанционного управления

Связанные категории