Руководство Skil 1610 MA Бетономешалка

Руководство

6

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

5) SERVICE

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SAFETY INSTRUCTIONS FOR MIXERS

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool (tools

with a rating of 230V or 240V can also be connected to

a 220V supply)

• Never use the tool without the protection frame

• Never use the tool in or near an explosive atmosphere

• Never mix combustible substances

• Never reach with your hand or any other object into the

mixing container during mixing

• Wear protective gloves, close-fi tting clothes and sturdy

shoes

• The noise level when working can exceed 85 dB(A);

wear ear protection

• Always disconnect plug from power source before

making any adjustment or changing any accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut off the cord of this

tool, it must be disposed of safely and not left

unattended

USE

• On/off 4

• Switch locking for continuous use 5

! be aware of the forces that occur as a result of

jamming; hold the tool firmly with both hands and

take a secure stance

• Speed control for smooth starting 6

• Maximum speed control 7

With wheel C 2 the maximum speed can be adjusted

from low to high (A-E)

- switch on the tool

- lock the switch

- turn wheel C to select maximum speed

• Protection frame 8

- for protecting the tool

- for guiding the tool

- for putting aside the tool in a simple way

- mount protection frame D before using the tool for

the fi rst time

! never use the tool without the protection frame

• Operating the tool

- mount mixing paddle F onto spindle E with both a

blade wrench 19 and a blade wrench 24 (not

standard included) 9

- connect plug to power source

- ensure the mixing container is securely positioned on

the fl oor

- dip the mixing paddle into the blending substance

before switching on the tool, and then gradually

increase the blending speed by putting more

pressure on trigger A 2 (so that the substance will

not splash around and the tool will not be

overloaded)

! switch the tool off only when the mixing paddle is

in the mixing container

• Holding and guiding the tool 0

! always hold the tool firmly with both hands

GUARANTEE / ENVIRONMENT

• Always keep tool and cord clean (especially the

ventilation slots)

- clean the tool with a dry, soft cloth (do not use

cleaning agents or solvents)

- clean ventilation slots G 2 regularly with a brush or

compressed air

! disconnect the plug before cleaning

• This SKIL product is guaranteed in accordance with

statutory/country-specifi c regulations; damage due to

normal wear and tear, overload or improper handling will

be excluded from the guarantee

• In case of a complaint, send the tool undismantled

together with proof of purchase to your dealer or the

nearest SKIL service station (addresses as well as the

service diagram of the tool are listed on

www.skileurope.com)

• Do not dispose of electric tools, accessories and

packaging together with household waste material

(only for EU countries)

- in observance of European Directive 2002/96/EC on

waste of electric and electronic equipment and its

implementation in accordance with national law,

electric tools that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility

- symbol ! will remind you of this when the need for

disposing occurs

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Skil 1610 MA Бетономешалка. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Skil. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Skil 1610 MA Бетономешалка на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Skil Бетономешалки
Больше руководств Бетономешалки

Часто задаваемые вопросы о Skil 1610 MA Бетономешалка

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Skil 1016 AA Бетономешалка

Руководство

Skil 1611 MA Бетономешалка

Руководство

Skil 1609 AA Бетономешалка

Руководство

Skil 1608 AA Бетономешалка

Руководство

Skil 1613 AA Бетономешалка

Руководство

Sparky BM2 1380CE Plus Бетономешалка

Руководство

Redverg RD-CM100L Бетономешалка

Руководство

Skiper СМ–70 Бетономешалка

Связанные категории