Руководство Scarlett SC-2160 Обогреватель

Вам нужно руководство для вашего Scarlett SC-2160 Обогреватель? Ниже вы можете бесплатно просмотреть и скачать PDF-инструкцию на русском языке. В настоящее время этот продукт имеет 2 часто задаваемых вопроса, 0 комментариев и имеет 0 голосов. Если это не то руководство, которое вам нужно, свяжитесь с нами.

Ваше устройство неисправно, и в руководстве отсутствует решение? Перейдите в Repair Café для получения бесплатных ремонтных услуг.

Руководство

Loading…

IM011
www.scarlett.ru SC-2158/SC-2159/SC-2160
4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
Please read this instruction manual carefully before use and keep in a safe place for future reference.
Before the first connecting of the appliance check that voltage indicated on the rating label corresponds to the mains
voltage in your home.
For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than
described in this instruction manual.
Do not use outdoors.
Always unplug the appliance from the power supply before cleaning and when not in use.
To prevent risk of electric shock and fire, do not immerse the appliance in water or in any other liquids. If it was
happened DO NOT TOUCH the appliance, unplug it immediately and check in service center.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliances by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not use other attachments than those supplied.
If the power cord is damaged it should be replaced by the manufacturer or authorized servicing center or qualified
professional for safety reasons.
Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the
nearest service center only.
Keep the cord away from sharp edges and hot surfaces.
Do not pull, twist, or wrap the power cord around appliance.
Unit surface temperature of the appliance is high, thus do not touch it, except the handle.
Operating unit should be far away from the flammable or easy bulging under high temperature objects. The convector
must not be located immediately below a socket-outlet.
CAUTION:
Do not cover the appliance when it is in use.
To avoid a circuit overload, do not operate another high wattage appliance on the same circuit.
If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at
least 2 hours before turning it on.
The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless
such changes influence significantly the product safety, performance, and functions.
INSTALLATION ON THE FLOOR
Turn on the convector, attach the wheels to the bottom of the convector, make sure that the bolt holes are properly
aligned, then tighten the screws (supplied).
Place the convector on the floor.
MOUNTING TO THE WALL
Attach the large bracket to the wall, using the available bolts and nuts (supplied).
Place the heater, leaving the distance between the base device and the floor for at least 50 cm, and make sure that
the distance between the upholstery and curtains is at least 1 m. Attach the rubber stops to the back of the device.
Place a large staple to the rear of the notches on the side of the device. Wear protective top small brackets and screw
them to the larger ones. It is necessary to secure the convector on the wall.
SWITCHING ON THE DEVICE
Plug it into a suitable outlet, set the temperature controller at the highest level (i.e., turn the knob clockwise until it
stops), H position.
TEMPERATURE CONTROL
When using this device you feel that the room temperature is too high, you can reduce it as follows: turn the
temperature controller anti-clockwise from the maximum position. After that, electric convector would work
intermittently.
POWER ADJUSTMENT
The power regulator is used to set heating power. The convector has two power levels: 1 (half rated power) and 2 (full
power). You can use the half-power mode, when the room temperature reaches the required level.
"ANTIFREEZE" MODE SETTING
Set the power regulator to "1" position, and set temperature regulator to "L" position. After that, the convector will
switch on automatically when room temperature drops to 5
о
С and will maintain temperature at this level.
TURNING OFF THE DEVICE
To turn the device off, put a power regulator to 0 or disconnect the power cord.
WARNING:
To avoid heat loss room should be kept closed, otherwise it will not get warm.
CLEAN AND CARE
The convector should be cleaned regularly to wipe out the dust on the surface. As this may result the convection
efficient.
Unplug from the power supply and allow the appliance to cool down.
Wipe out with a soft damp cloth. Do not use detergent or abrasives.
Do not scrap the surfaces of fins with sharp hard tools, to avoid surfaces getting rusty, because of damage of the paint
coat.
Загрузить руководство на русскийском (PDF, 0.53 MB)
(Помните о необходимости охраны окружающей среды и распечатывайте настоящее руководство только в том случае, если это действительно необходимо)

Loading…

Рейтинг

Сообщите нам, что вы думаете о Scarlett SC-2160 Обогреватель, оставив оценку продукта. Хотите поделиться вашими впечатлениями от данного изделия или задать вопрос? Вы можете оставить комментарий в нижней части страницы.
Вы довольны Scarlett SC-2160 Обогреватель?
Да Нет
Будьте первым, кто оценит это изделие
0 голоса

Присоединиться к беседе по данному изделию

Здесь вы можете поделиться тем, что думаете о Scarlett SC-2160 Обогреватель. Если у вас есть вопросы, сначала внимательно прочтите инструкцию. Запросить руководство можно с помощью контактной формы.

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Scarlett SC-2160 Обогреватель. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Scarlett. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Scarlett SC-2160 Обогреватель на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Бренд Scarlett
Модель SC-2160
Категория Обогреватели
Тип файла PDF
Размер файла 0.53 MB

Все инструкции для Scarlett Обогреватели
Больше руководств Обогреватели

Часто задаваемые вопросы о Scarlett SC-2160 Обогреватель

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Как пыль влияет на эффективность обогревателя? Проверенный

Пыль может скапливаться на нагревательных элементах и ​​воздушных фильтрах обогревателя, снижая его эффективность. Это может привести к тому, что нагреватель будет работать больше, чтобы производить такое же количество тепла, что приведет к увеличению потребления энергии и увеличению счетов за коммунальные услуги. Чтобы поддерживать эффективность нагревателя, регулярно чистите его и заменяйте воздушный фильтр по мере необходимости.

Это было полезно (107) Читать далее

Как определить размер обогревателя, который мне нужен для комнаты? Проверенный

Размер обогревателя, который вам нужен для комнаты, зависит от размера комнаты и изоляции пространства. Общее эмпирическое правило — использовать 60 Вт на квадратный метр площади. Например, если площадь комнаты 14 квадратных метров, подойдет обогреватель мощностью 840 Вт.

Это было полезно (65) Читать далее
Руководство Scarlett SC-2160 Обогреватель

Сопутствующие товары

Связанные категории