Руководство Saturn ST-FP1096 Мясорубка

Руководство

4

not switch on.

Never try to replace the parts and repair

the unit by yourself.

FOR THE FIRST TIME

Check that voltage, indicated on the

rating label, corresponds the mains

voltage in your home.

Wash all parts (except body) in warm

soapy water.

Before plugging in, ensure the “ON/OFF/

Reverse switch is turned to "OFF" posi-

tion.

INSTRUCTION FOR USE

ASSEMBLING

§ Holding the head, insert it in the inlet

with one hand, place the locking knob

into the hole on the side of the motor

housing. Tighten it clockwise to secure

the head (fig. 1-2).

§ Place the feed screw into the head,

long end first, by turning the feed screw

slightly until it is set into the motor

housing (fig.3).

§ Place the cutting blade onto the feed

screw shaft with the blade facing the

front as illustrated (fig.4). If it is not

fitted properly, meat will not be ground.

§ Place the desired cutting plate next

to the cutting blade, fitting protrusions

in the slots (fig.5).

§ Support or press the centre of the

cutting plate with one finger, then screw

the fixing ring until tight with another

hand (fig.6).

§ Do not over tighten. Place the hop-

per plate on the head and fix into posi-

tion.

§ Locate the unit on a firm place.

§ The air passage at the bottom and

the side of the motor housing should be

kept free and not blocked.

MINCING MEAT

u Cut all foods into pieces (sinew-

less, boneless and fatless meat is rec-

ommended, approximate size: 20 mm x

20 mm x 60 mm), so that they fit easily

into the hopper opening.

u Plug in and turn the “R / ON”

switch to "ON" position, then turn the

“ON/OFF/Reverse switch to "ON" posi-

tion.

u Feed foods into the hopper plate.

Use only the food pusher (fig.7).

u After use switch the unit off and

unplug it from the power supply.

REVERSE FUNCTION

u In case of jamming switch the

appliance off by turning the “R / ON”

switch to "R" position and “ON/OFF/

Reverse switch to "R" position.

u Feed screw will be rotating in the

opposite direction, and the head will get

empty.

u If it doesn't work, switch the unit

off and clean it.

MAKING KEBBE

RECIPE

STUFFING

Mutton

Olive oil

Onion (cut fine-

ly)

Spices

Salt

Flour

100g

1 1/tablespoons

1 1/tablespoons

to your taste

to your taste

1 1/tablespoons

u

Mince mutton once or twice.

u Fry onion until brown and add

minced mutton, all spice, salt and

flour.

OUTLET COVER

Lean meat

Flour

Spices

Nutmeg (cut

finely)

450g

150-200g

to your taste

1

to your taste

5

Powdered red

pepper

u Mince meat three times and mix all

ingredients together in a bowl. More

meat and less flour for outlet cover cre-

ates better consistency and taste.

u Grind the mixture three times.

u Disassemble by reversing the steps

from 5-3 to remove the cutting plate

and cutting blade.

u Place kebbe attachments onto the

feed screw shaft together, fitting protru-

sions in the slots (fig.8).

u Screw fixing ring into place until

tight. Do not over tighten (fig.9).

u Make the cylindrical outlet cover (fig.

10).

Form kebbe as illustrated below and

deep fry.

CUTTING SLICE/SHRED/STRIP

u Press the fasten button, hold the

head and insert it into the inlet (when

inserting, please pay attention the head

must be slanted as per arrow indicated

on the top, see fig. 8), then move the

head anticlockwise, so that the head

being fastened tightly. There will be

locked when you heard a voice of “KA”

(fig. 2).

u Put the cutting attachments “slice

cutter” or “shredded cutter” or “strip

cutter” into the cutting head. Note:

must be on place (fig. 9).

u The switch I/II knob to “I”, the

switch ON/O/R knob to “ON” position,

when you cutting. Put the vegetable into

vegetable cutting head, and then push

down the vegetable pusher with 5N

power (fig. 10).

u After use, switch the unit off and

unplug it from the power supply.

MAKING SAUSAGE

u Before starting, please assemble

sausage attachment as per follow-

ing (fig. 11).

TOMATO JUICER

u Revolve the adjusted nail to the

front of tomato juicer bracket (fig. A).

u Put the fix ring through the tomato

juicer bracket (fig. B).

u Pack the attachments like fig. C.

u Put the containers under tomato

juicer attachment like fig. D to collect

juice and residue. Cut the tomato into

fix meat grinder like head size, then

press them gently, it can short the

working time.

u Adjust the screw can make the

juice dense or thin.

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Saturn ST-FP1096 Мясорубка. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Saturn. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Saturn ST-FP1096 Мясорубка на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Saturn Мясорубки
Больше руководств Мясорубки

Часто задаваемые вопросы о Saturn ST-FP1096 Мясорубка

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Saturn ST-FP1094 Мясорубка

Руководство

Saturn ST-FP1095 Мясорубка

Руководство

Saturn ST-FP7099 Мясорубка

Руководство

Saturn ST-FP8095 Мясорубка

Руководство

Saturn ST-FP1093 Мясорубка

Руководство

Saturn ST-FP7096 Мясорубка

Руководство

Saturn ST-FP7095 Мясорубка

Руководство

Sinbo SHB 3109 Мясорубка

Связанные категории