Руководство Saturn ST-CC0215 Утюг

Руководство

4

· Connect he iron to a suitable mains

supply outlet

· Turn the temperature control button

to the “• • ”, or “• • •” "MAX" setting

· The pilot light turns on when the

required temperature is reached. The

iron is ready for use.

· Turn the steam knob to the required

position, steam starts coming out from

the holes in the sole plate.

Notice: With conventional steam

ironing, water may leak from the sole

plate if too low temperature has been

select. If this happens turn the

temperature control to the advised

position. Steam will recommence as

soon as die appropriate temperature has

been reached.

BURST OF STEAM

This function provides an extra amount

of steam to remove stubborn wrinkles.

· Fill the iron with water.

· Turn the temperature control to the

position 'MAX".

· The iron is ready for use.

· Press the burst of steam knob once

· Steam will penetrate into the

garment removing the wrinkles.

· Wait a few seconds before pressing

the steam control knob wrinkles again

when there are stubborn wrinkles.

Usually all wrinkles can be removed

within three pressings.

DRY IRONING

· Connect the iron to a suitable mains

supply outlet.

· Ensure that the steam control knob

is in position “0”.

· Select the setting on the

temperature control.

· When the pilot light turns off, the

required temperature is reached. The

iron is ready to use.

TO LET THE IRON HEAT UP AGAIN

Pick up the iron or move it slightly.

The red shot-off pilot goes out. If the

temperature of the soleplate drops

below the set ironing temperature, the

temperature pilot goes on.

If the pilot light goes on after you have

move the iron, wait for it to go out

before you start ironing.

If the pilot light does not go on after

you move the iron, the soleplate still

has right temperature and iron is ready

for use.

SELF CLEAN FUNCTION

The Self Clean function can remove any

scale or impurities.

Use the self-clean function once every

two weeks. If the water in your area is

very hard, the self-clean function should

used more frequently.

· Make sure the appliance is

unplugged.

· Set the Variable steam control knob

to position "0" (=no steam).

· Fill the water tank to the maximum

level.

· Select the maximum ironing

temperature.

· Put the plug in the wall socket.

· Unplug the iron when the

temperature pilot light has gone out.

· Hold the iron over the silk, press and

hold die self-clean button and gently

shake the iron. (Steam and boiling

water will come out of the soleplate.

Impurities and flakes (if any) will be

flushed out.)

· Release the self-clean button as soon

as all water in the tank has been used

up.

· Repeat the self-clean process if the

iron still contains a lot of impurities.

CARE AND CLEANING

1. Turn the Temperature Control Dial to

OFF, then disconnect the iron from the

wall outlet and cool it down completely.

2. Deposits and other residues on the

sole plate can be removed with a cloth

soaked in a vinegar/water solution.

3. The casing may the wiped with a

damp cloth and then polished with a dry

one.

4. Never use any abrasives to clean the

sole plate.

5. Keep the sole plate smooth, avoid

contact with metal objects.

6. When you have finished ironing or

you are leaving iron unattended:

- turn the steam control knob to

position “0”.

- stand the iron upright

- disconnect the iron from the wall

outlet

7. Do not allow children to touch the

iron or the power cord whom ironing.

8. Do not immerse die iron or the cord

into water or any other liquid.

9. Do not touch hot metal parts, hot

water or steam. These parts become hot

and may cause burns. Take care if you

turn die iron upside downs: there may

be not hot water in the tank. The plug

and cord should not be allowed to touch

the hot sole plate. Let the iron cool

down completely before taking it away.

Roll the power cord around the iron for

storage.

10.Disconnect die iron from the wall

outlet for filling in water or when you

remove the water after use.

11.The iron is for household use only.

12. Save the instruction manual for

future reference.

5

Notes:

· Some parts of the iron have been

slightly greased and as result the iron

may smoke slightly when switched on

for the first time. It will not happen

again after a few uses.

· Before using for the first time,

remove any protective films or stickers

from the sole plate and the cabinet.

Then clean the sole place with a soft

cloth.

· When using the iron for the first

time, test it on an old piece of fabric to

ensure that the sole plate and water

tank are completely clean.

HOW TO FILL IN WATER

· Set the Steam Control Knob “0” and

the temperature Control Dial to OFF.

· Unplug the iron from the wall outlet.

· Pour water into the water inlet.

· Fill up to the maximum level “MAX”

of the water tank.

LABEL KIND OF

TEXTILE

FIBRE

MATERIAL

Synthetic Acrylic

Modacryc

Polypropylene

Po|yurethane

Synthetic Acetate

Triacetate

Synthetic Cupro

Polyamide

(Nylon)

Polyester

Viscose(Rayon)

Silk Silk

Wool Wool

Cotton Cotton

Linen Linen

SETTING THE TEMPERATURE

· Insert the plug in the wall socket and

stand the iron upright.

· Turn the temperature control knob to

the desired temperature setting.

· The desired temperature has been

reached when the pilot light has turned

off.

The pilot light will turn on and off from

time after time, indicating that the

selected temperature is being

maintained.

Specification

Power: 2200 W

Rated Voltage: 220-230 V

Rated Frequency: 50 Hz

Rated Current: 10 A

Set

Iron 1pc

Instruction Manual with

Warranty Book 1pc

Package 1pc

ENVIRONMENT FRIENDLY

DISPOSAL

You can help protect

the environment!

Please remember to

respect the local

regulations: hand in the

non-working electrical

equipments to an

appropriate waste

disposal centre.

The manufacturer reserves the

right to change the specification

and design of goods.

RU

УТЮГ

Уважаемый покупатель!

Поздравляем Вас с приобретением

изделия с торговой маркой

“Saturn”. Уверены, что наши

изделия будут верными и

надежными помощниками в

Вашем домашнем хозяйстве.

Не подвергайте устройство резким

перепадам температур. Резкая

смена температуры (например,

внесение устройства с мороза в

теплое помещение) может

вызвать конденсацию влаги

внутри устройства и нарушить его

работоспособность при

включении. Устройство должно

отстояться в теплом помещении не

менее 1,5 часов.

Ввод устройства в эксплуатацию

после транспортировки

производить не ранее, чем через

1,5 часа после внесения его в

помещение.

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Saturn ST-CC0215 Утюг. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Saturn. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Saturn ST-CC0215 Утюг на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Saturn Утюги
Больше руководств Утюги

Часто задаваемые вопросы о Saturn ST-CC0215 Утюг

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Saturn ST-CC7133 Утюг

Руководство

Saturn ST-CC7122 Утюг

Руководство

Saturn ST-CC7141 Утюг

Руководство

Saturn ST-CC0211 Утюг

Руководство

Saturn ST-CC0210 Утюг

Руководство

Saturn ST-CC7109 Утюг

Руководство

Saturn ST-CC0229 Утюг

Руководство

Saturn ST-CC7142 Утюг

Связанные категории