© 2019 Koninklijke Philips N.V.
All rights reserved.
10 11 12
P
0
1
2
5
6
9
8
4 min 1 kg 1
20 sec 500 g1
30 sec 500 g
1
30 sec 200 g
1
30 sec 2 pcs
1
30 sec 500 g
1
(HR7629)
(HR7629)
1 min1
1 min1
1 min1
P
P x 9
(HR7628, HR7629)
6 x
(MAX)
(MAX)
(MAX)
(MAX)
5 x 1 sec 500 gP
5 x 1 sec 500 g P/2
30 sec 50 gP
60 sec 250 g2
45 sec 250 g2
30 sec 200 g2
2-3 min 500 g
360 ml
350 ml
4 pcs
1
1
1
30 sec 500 g1
30 sec 500 g1
(HR7627, HR7628)
60-180 sec
60-180 sec
P
0
1
2
30 sec 300 g1
400 g
3 min
600 ml
2
30 sec 2 pcs 1
EN User manual
RU Руководствопользователя
KK Қолданушыныңнұсқасы
UK Посібниккористувача
English
1 Important
Congratulations on your purchase and welcome to Philips! To fully benet from the support
that Philips offers, register your product at www.philips.com/welcome.
Read this user manual carefully before you use the appliance, and save the user manual for
future reference.
Danger
• Do not immerse the motor unit in water nor rinse
it under the tap.
Warning
• Never use your ngers or an object to push
ingredients into the feeding tube while the appliance
is running. Only use the pusher.
• Before you connect the appliance to the power,
make sure that the voltage indicated on the bottom
of the appliance corresponds to the local power
voltage.
• Never connect this appliance to a timer switch, to
avoid a hazardous situation.
• Do not use the appliance if the power cord, the
plug, protecting cover, rotating sieve or any other
parts are damaged or has visible cracks.
• If the power cord is damaged, you must have it
replaced by Philips, a service center authorized
by Philips, or similarly qualied persons to avoid a
hazard.
• This appliance shall not be used by children. Keep
the appliance and its cord out of reach of children.
• This appliance can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved.
• For their safety, do not allow children to play with
the appliance.
• Never let the appliance run unattended.
• If food sticks to the wall of the blender jar or bowl,
switch off the appliance and unplug it. Then use a
spatula to remove the food from the wall.
• Be careful when you are emptying the bowl, handle
or clean the discs, the blade units and the juicer
sieve. The cutting edges are very sharp.
• Do not touch the blades, especially when the
appliance is plugged in. The blades are very sharp.
• If the blades get stuck, unplug the appliance before
you remove the ingredients that block the blades.
• Be careful if hot liquid is poured into the food
processor or blender as it can be ejected out of the
appliance due to a sudden steaming.
• This appliance is intended for household use only.
Caution
• Never switch off the appliance by turning the
blender jar, the bowl, or their lids. Always switch off
the appliance by turning the speed selector to 0 or
OFF.
• Unplug the appliance immediately after use.
• Always wait until the moving parts stop running,
then switch off and unplug the appliance before
opening the lid and reaching into any of the parts
that move in use.
• Always switch off and unplug the appliance if it is left
unattended, and before assembling, disassembling,
cleaning and changing accessories, or approaching
parts that move in use.
• Thoroughly clean the parts that come into contact
with food before you use the appliance for the rst
time. Refer to the instructions and table for cleaning
given in this manual.
• Never use any accessories or parts from other
manufacturers that Philips does not specically
recommend. If you use such accessories or parts,
your guarantee becomes invalid.
• Do not exceed the maximum level indication on
the bowl or the jar. Follow the quantities, processing
time and speed as indicated in the user manual.
• Let hot ingredients cool down (< 80ºC) before
processing them.
• Always let the appliance cool down to room
temperature after each batch that you process.
• Certain ingredients such as carrots may cause
discolorations on the surface of the parts. This
does not have a negative effect on the parts. The
discolorations usually disappear after some time.
• Noise level: Lc = 85 dB [A]
Electromagneticelds(EMF)
This Philips appliance complies with all applicable standards and regulations regarding
exposure to electromagnetic elds (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on scientic evidence
available today.
Recycling
This symbol means that this product shall not be disposed of with normal household
waste (2012/19/EU).
Follow your country’s rules for the separate collection of electrical and electronic
products. Correct disposal helps prevent negative consequences for the environment and
human health.
2 Introduction
Congratulations on your purchase and welcome to Philips! To fully benet from the support
that Philips offers, register your product at www.philips.com/welcome.
This appliance is equipped with a built-in safety lock. You can only switch on the appliance
after you correctly assemble the following parts on the motor unit:
• the food processor bowl and its lid, or
• the blender jar and its lid (HR7628, HR7629 only), or
• the citrus press (HR7629 only)
If these parts are assembled correctly, the built-in safety lock is unlocked.
For recipes to use with your food processor, go to www.philips.com/kitchen
3 Foodprocessor
Warning
• Never use your ngers or an object to push ingredients into the feeding tube while the appliance is
running. Only use the pusher.
Blade unit
Before you start, make sure you assemble according to Fig. 2.
You can use the blade unit to chop, mix, blend, or puree ingredients. You can also use it to
mix and blend cake batters.
Caution
• Do not use the blade unit to chop hard ingredients, like coffee beans, turmeric, nutmeg, and ice cubes, as this
may cause the blade to get blunt.
Note
• Do not let the appliance run too long when you chop (hard) cheese or chocolate. Otherwise these
ingredients become too hot, start to melt, and turn lumpy.
• Precut large pieces of food into pieces of approx. 3 x 3 x 3 cm.
1 Turn the the bowl clockwise to x it on the motor unit, and then put the tool holder
in the bowl.
» When the bowl is xed correctly, you hear a click.
2 Put the blade unit on the tool holder.
3 Put the ingredients in the bowl.
4 Put the lid on the bowl, and then turn the lid clockwise to x it.
» When the lid is assembled correctly, you hear a click and the lid is xed to the
bowl handle.
5 Put the pusher into the feeding tube.
6 Connect the power plug to the power supply.
7 Check the preparation time, the maximum amount and the speed setting required for
the ingredients in Table 1. Turn the knob to the desired speed setting.
8 After use, turn the knob to 0, and then unplug the appliance.
Tip
• When you chop onions, turn the knob to P a few times to prevent the onions from becoming too
nely chopped.
• How to remove food that sticks to the blade or to the inside of the bowl? 1. Switch off the appliance,
and then unplug it. 2. Remove the lid from the bowl. 3. Remove the ingredients from the blade or
from the side of the bowl with a spatula.
Kneading accessory
Before you start, make sure you assemble according to Fig. 3.
You can use the kneading accessory to knead yeast dough for bread and pizzas. You
need to adjust the amount of liquid to form the dough according to the humidity and
temperature condition.
Note
• Do not use the kneading accessory to blend cake batters. Use the blade unit for this job.
• Always put the kneading accessory in the bowl before you add the ingredients.
1 Turn the the bowl clockwise to x it on the motor unit, and then put the tool holder
in the bowl.
» When the bowl is xed correctly, you hear a click.
2 Put the kneading accessory on the tool holder.
3 Put the ingredients in the bowl.
4 Put the lid on the bowl, and then turn the lid clockwise to x it.
» When the lid is assembled correctly, you hear a click and the lid is xed to the
bowl handle.
5 Put the pusher into the feeding tube.
6 Connect the power plug to the power supply.
7 Turn the knob to the 1 position.
8 Check the preparation time, the maximum amount and the speed setting required for
the ingredients in Table 1.
9 After use, turn the knob to 0, and then unplug the appliance.
Discs and Inserts
Before you start, make sure you pick your desired disc from following and assemble
according to Fig. 4 and Fig. 5.
• Emulsifying disc
• Insert for ne slicing (HR7627 and HR7628 only)
• Insert for coarse shredding (HR7627 and HR7628 only)
• Insert for granulating (HR7627 and HR7628 only)
• Reversible slicing / shredding disc (coarse) (HR7629 only)
Caution
• Be careful when you handle the slicing blade of disc. It has a very sharp cutting edge.
• Never use the disc to process hard ingredients, like ice cubes.
• Do not exert too much pressure on the pusher when you press ingredients into the feed tube.
Note
• Precut large ingredients into chunks that t in the feeding tube.
1 Turn the bowl clockwise to x it on the motor unit, and then put the tool holder in
the bowl.
» When the bowl is xed correctly, you hear a click.
2 Put the disc on the shaft. For inserts (HR7627 and HR7628 only), place an insert in the
insert holder as indicated below, then place the insert holder with insert on the shaft.
Place the opening of the insert over the shaft of the insert holder.
Push the opening of the insert over the projection on the shaft.
Press the insert onto the insert holder until it locks in position with a click.
3 Put the lid on the bowl, and then turn the lid clockwise to x it.
» When the lid is assembled correctly, you hear a click and the lid is xed to the
bowl handle.
4 Put the ingredients into the feeding tube with the pusher. Fill the feeding tube evenly
for the best results. When you have to process a large amount of ingredients, process
small batches and empty the bowl between batches.
5 Connect the power plug to the power supply.
6 Check the preparation time, the maximum amount and the speed setting required for
the ingredients in Table 1. Select the speed that matches the color of the accessory.
7 After use, turn the speed selector to 0, and then unplug the appliance.
Citruspress(HR7629only)
Before you start, make sure you assemble according to Fig. 6.
You can use the citrus press to squeeze citrus fruits.
1 Turn the the bowl clockwise to x it on the motor unit, and then put the tool holder
in the bowl.
» When the bowl is xed correctly, you can hear a click .
2 Put the sieve for citrus press on the tool holder in the bowl. Make sure that the
projection on the sieve is locked in the slot of the bowl handle.
» When the sieve is xed correctly, you can hear a click .
3 Put the cone on the sieve.
4 Connect the power plug to the power supply.
5 Check the maximum amount required for the ingredients in Table 1. Turn the knob
to speed 1.
» The cone starts rotating.
6 Press the citrus fruit onto the cone.
7 Stop pressing from time to time to remove the pulp from the sieve. When you nish
pressing or when you want to remove the pulp, turn the knob to 0 and remove the
bowl from the appliance with the sieve and cone on it.
Blender(HR7628andHR7629only)
Before you start, make sure you assemble according to Fig. 7.
The blender is intended for:
• Blending uids, like dairy products, sauces, fruit juices, soups, mixed drinks, and shakes.
• Mixing soft ingredients, like pancake batter.
• Pureeing cooked ingredients, like baby food.
• Crushing ice.
Note
• Do not exert too much pressure on the handle of the blender jar.
• Never open the lid to put your hand or any object in the jar while the blender is running.
• Always assemble the sealing ring onto the blade unit before you attach the blade unit to the blender jar.
• To add liquid ingredients during processing, pour them into the blender jar through the feeding hole.
• Precut solid ingredients into small pieces before you process them.
• If you want to prepare a large quantity, process small batches of ingredients instead of a large
quantity at once.
• To avoid spillage: When you process a liquid that is hot or tends to foam (for example, milk), do not
put more than 1 liter of liquid in the blender jar.
• If you are not satised with the result, switch off the appliance and stir the ingredients with a spatula.
Remove some of the contents to process a smaller quantity or add some liquid.
1 Turn the blade unit on the blender jar.
2 Place the blender jar on the motor unit and turn it clockwise to x it.
» When the jar is xed correctly, you hear a click.
3 Put the ingredients in the blender jar within the maximum level indication.
4 Place the lid on the blender jar, and then turn it clockwise to x it.
5 Connect the power plug to the power supply.
6 Check the preparation time, the maximum amount and the speed setting required for
the ingredients in Table 1. Turn the knob to the desired speed setting. To crush ice,
turn the knob to P. Press the button again to stop.
7 After use, turn the knob to 0, and then unplug the appliance.
1/2
3140 035 30337
Условия
хранения/
Сақтау
шарттары
Условия
эксплуатации/
пайдалану
шарттары
Температура/
Температура
-20°C ~+60 °C +10°C ÷ +40°C
Относительная
влажность/
Салыстырмалы
ылғалдылық
20% ÷ 95% 20% ÷ 95%
Атмосферное
давление/
Атмосфералық
қысым
98 ÷ 102 kPa 98 ÷ 102 kPa
HR7627, HR7628
HR7629
Присоединиться к беседе по данному изделию
Здесь вы можете поделиться тем, что думаете о Philips HR7629 Daily Collection Кухонный комбайн. Если у вас есть вопросы, сначала внимательно прочтите инструкцию. Запросить руководство можно с помощью контактной формы.