Руководство Nedis WIFIFNH20CWT Обогреватель

Руководство

4

a

Quick start guide

Electric fan heater WIFIFNH20CWT

For more information see the extended

manual online: ned.is/wifnh20cwt

Intended use

The Nedis WIFIFNH20CWT is an electric fan heater used for heating

rooms.

Any modication of the product may have consequences for safety,

warranty and proper functioning.

Main parts (image A)



Control panel



Air outlet



Handle



Air inlet grid



Power switch



Plug

Safety instructions

-

WARNING

• Only use the product as described in this manual.

• Any other use may cause re, electric shock, and/or injury to

persons and may void the warranty.

• Any use of not recommended attachment or accessory may

cause injury to persons, or damage.

• Do not use the product if a part is damaged or defective.

Replace a damaged or defective device immediately.

• Do not disassemble or try to repair the product.

• Do not drop the product and avoid bumping.

• This product may only be serviced by a qualied technician for

maintenance to reduce the risk of electric shock.

• Make sure that the electrical supply in your area matches a

voltage of 220 – 240 VAC and a frequency of 50 Hz.

• Make sure that no other high current appliances are plugged

into the same circuit with your product. Overloading may occur.

• Disconnect the product from the power outlet and other

equipment if problems occur.

• Do not expose the product nor the cord to water, any other

liquid or moisture.

• Do not use the product where splashing of water might occur

e.g. bathrooms, swimming pools or close to a washbowls.

• Fully extend the power cord and make sure the power cord does

not contact the product.

• Do not cover the power cord by e.g. carpets, rugs or furniture.

• Ensure people do not trip over the cord.

• Only plug the cable into a wall outlet. Do not use extension cords.

• Do not use the product when the cord or plug is damaged.

• Turn o the main power switch before unplugging the power cord.

• Do not unplug the product by pulling on the cable. Always

grasp the plug and pull.

• Do not let children play with parts of packaging such as plastic

bags, because of danger of suocation.

• Close supervision is necessary when the product is used by or

near children, animals or inrm persons. Do not allow children

to play with it or touch it.

• Do not leave the product unattended when switched on.

• Do not use the product in rooms where ammable liquids or

gases are used or stored.

• An area of one meter around the product has to be free from

animals and any combustible materials, such as curtains and

bedding or walls. Do not point the outlet at any of these.

• Do not obstruct or cover the product’s air inlet or outlet grid.

• Do not place any objects on the product.

• Do not locate the product immediately below a power outlet.

• Do not move the product during operation.

• After use only transport the product by using the handle.

• Only handle the product with dry hands. Handling with wet

hands might cause an electric shock.

• Switch o and unplug the product when not in use or before

maintenance.

• Do not pull the power cable over sharp edges.

Switch on the heater

1. Insert the plug into a power outlet.

2. Then turn on the main power switch A

5

.

Now the heater is in “stand-by” mode, with only the temperature

indicator shown.

Use the control panel (image B)



On / o button



Display



Low power indicator



Oscillation button



Mode indicator



Timer indicator



Timer button



Status indicator



Power button (low, high

or fan only)



High power indicator



Set temperature button

Stand-by

1. Press B

1

to wake the product. B

5

and B

8

will light up.

2. Press B

1

again to change back to stand-by.

4

The fan will continue to turn for 30 seconds to cool down.

Low – high power

1. Press B

9

to switch between low power, high power or fan

only.

4

B

3

lights up for low power.

4

B

q

lights up for high power.

Timer

1. Press B

7

to activate the timer, B

6

will light up.

4

The time will show at B

5

.

4

The time can be set between 1 to 8 hours.

2. Hold B

7

to deactivate the timer.

Oscillation

1. Press B

4

to activate the oscillation.

2. Press B

4

again to deactivate the oscillation.

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Nedis WIFIFNH20CWT Обогреватель. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Nedis. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Nedis WIFIFNH20CWT Обогреватель на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Nedis Обогреватели
Больше руководств Обогреватели

Часто задаваемые вопросы о Nedis WIFIFNH20CWT Обогреватель

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Nedis HTFA10CWT Обогреватель

Руководство

Nedis HTCO10FWT Обогреватель

Руководство

Nedis HTOI20EWT7 Обогреватель

Руководство

Nedis CCCH200EWH Обогреватель

Руководство

Nedis HTFA12CGY Обогреватель

Руководство

Nedis HTFA11CWT Обогреватель

Руководство

Nedis HTOI20EWT9 Обогреватель

Руководство

Nedis HTCO40FBK Обогреватель

Связанные категории