Руководство Makita HG6530V Промышленный фен

Руководство

5

English

and/or remove the battery pack, if detachable,

from the power tool before making any adjust-

ments, changing accessories, or storing power

tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

4. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

5. Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition that

may affect the power tool’s operation. If dam-

aged, have the power tool repaired before use.

Many accidents are caused by poorly maintained

power tools.

6. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

7. Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and

the work to be performed. Use of the power tool

for operations different from those intended could

result in a hazardous situation.

8. Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for

safe handling and control of the tool in unexpected

situations.

9. When using the tool, do not wear cloth work

gloves which may be entangled. The entangle-

ment of cloth work gloves in the moving parts may

result in personal injury.

Service

1. Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

2. Follow instruction for lubricating and chang-

ing accessories.

ADDITIONAL SAFETY

INSTRUCTIONS FOR HEAT GUN

Q Do not place your hand over the air vents or

block the vents in any way.

Q The nozzle and accessories of this tool

become extremely hot during use. Let these

parts cool down before touching.

Q Always switch the tool off before putting it

down.

Q Do not leave the tool unattended while it is

switched on.

Q A re may arise if the appliance is not used

with care.

Q Heat may be conducted to combustible materi-

als that are out of sight. Do not use in a damp

atmosphere, where ammable gases may be

present or near combustible materials.

Q Allow the tool to cool fully before storing.

Q Ensure adequate ventilation as toxic fumes

may be produced.

Q Do not use as a hairdryer.

Q Do not obstruct either the air intake or noz-

zle outlet, as this may cause excessive heat

build-up resulting in damage to the tool.

Q Do not direct the hot air blast at other people.

Q Do not touch the metal nozzle as it becomes

very hot during use and remains hot for up to

30 minutes after use.

Q Do not place the nozzle against anything while

using or immediately after use.

Q Do not poke anything down the nozzle as

it could give you an electric shock. Do not

look down the nozzle while the unit is work-

ing because of the high temperature being

produced.

Q Do not allow paint to adhere to the nozzle or

scraper as it could ignite after some time.

Removing paint

Q Do not use this tool to remove paint containing

lead. The peelings, residue and vapors of paint

may contain lead, which is poisonous. Any

pre-1960 building may have been painted in

the past with paint containing lead and cov-

ered with additional layers of paint.

Once deposited on surfaces, hand to mouth

contact can result in the ingestion of lead.

Exposure even to low levels of lead can cause

irreversible damage to the brain and nervous

system. Young and unborn children are partic-

ularly vulnerable.

Q When removing paint, ensure that the work

area is enclosed. Preferably wear a dust mask.

Q Do not burn the paint. Use the scraper and

keep the nozzle at least 25 mm away from the

painted surface. When working in a vertical

direction, work downwards to prevent paint

from falling into the tool and burning.

Q Dispose of all paint debris safely and ensure

that the work area is thoroughly cleaned after

completing the work.

MOUNTING THE CORRECT ACCESSORY (IF APPLICABLE)

Icon Description Purpose

Glass protection nozzle Protection windows when stripping frames

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Makita HG6530V Промышленный фен. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Makita. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Makita HG6530V Промышленный фен на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Makita Промышленные фены
Больше руководств Промышленные фены

Часто задаваемые вопросы о Makita HG6530V Промышленный фен

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Makita DHG181K Промышленный фен

Руководство

Makita HG6531C Промышленный фен

Руководство

Дэу DAF 2200 Промышленный фен

Руководство

Högert HT2C551 Промышленный фен

Руководство

Ryobi R18HG-0 Промышленный фен

Руководство

Kalibr ТП-2050 Промышленный фен

Руководство

GOODiY MJHG009 Промышленный фен

Руководство

Dekado ФС 2000 Промышленный фен

Связанные категории