8
GB
ORIGINAL INSTRUCTIONS
PRODUCT CHARACTERISTICS
The toaster is a product designed for heating, toasting and defrosting sliced bread. Thanks to the smooth toasting level adjust-
ment, you have a wide range of adjusting the operating parameters of the product to your needs. Proper, reliable and safe oper-
ation of the product depends on appropriate use, that is why you should
Read and keep the entire manual before the fi rst use of the product.
The supplier shall not be held liable for any damage or injury resulting from improper use of the product, failure to observe the
safety regulations and recommendations of this manual. Use of the product for purposes other than those for which it was intend-
ed shall cause the loss of the user’s rights to the guarantee and under warranty.
ACCESSORIES
The product is supplied complete and does not require assembly. However, before using the product, remove all packaging and
transport protection elements. Preparatory activities described later in this manual are also required.
GENERAL INSTRUCTIONS FOR USE
The product has been designed for home use and is not allowed to be used in commercial applications, e.g. in catering facilities.
The product is used for heat treatment of sliced bread without additives. It is recommended to use bread intended for toaster
preparation.
The product should not be used to prepare food other than bread without additives.
It is forbidden to repair, disassemble or modify the product on one’s own. All repairs to the product must be carried out by an
authorised service centre.
The product must be kept under supervision at all times during operation.
WARNING! The product heats up to high temperature during operation, do not touch the housing or metal parts during operation
and immediately after operation as this may cause severe burns.
The product is not intended for use by children under at least 8 years of age and by persons with reduced physical and mental
abilities and by persons without experience in or understanding of the operation of the product. Unless they will be supervised or
instructed to use the product safely, in a manner ensuring that the risks involved are understood. Children should not play with the
product. Unattended children should not be allowed to perform the cleaning and maintenance of the appliance.
Recommendations concerning transport and installation of the product
The product may only be placed on a hard, fl at, level, non-fl ammable and resistant to high temperatures surface. The surface
should be able to withstand the weight of the appliance itself and of the food placed on it.
Ensure that there is a minimum distance of 10 cm around the side walls of the product, and do not place non-high temperature re-
sistant materials above the product. This will allow for the proper ventilation of the product. Do not place near edges of, e.g. a table.
Do not place the product near fl ammable materials, e.g. curtains or drapes.
Do not place any electrical equipment above the product. During operation, water vapour is released, which can cause a short
circuit in the electrical system and lead to electric shock.
It is forbidden to drill any holes in the product, as well as making any other modifi cations of the product not described in the manual.
Move the product only when cooled down, grasping the housing. Do not move the product by pulling on the power cord.
The temperature at the place of installation and use of the product must be within the range of +10
O
C ÷ +38
O
C, and the relative
humidity must be below 90% without condensation.
The product is intended for indoor use only. Do not expose it to precipitation or water in any form.
Recommendations for connecting the product to the power supply
Before connecting the product to the power supply, make sure that the voltage, frequency and performance of the power supply
correspond to the values shown on the product’s rating plate. The plug must fi t into the outlet. It is forbidden to modify the plug or
socket in any way for the purpose of fi tting.
The product must be connected directly to a single socket of the power supply. It is forbidden to use extension cords, adapters or
double sockets. The power supply circuit must be fi tted with a protective conductor and at least a 16 A protective device.
Avoid contact of the power cord with sharp edges, hot objects or surfaces. During operation, the power cord must always be fully
extended and the position of the power cord must be set so that it does not become an obstacle during product operation. The
power cord shall not be placed in a manner that would pose a risk of tripping. The power supply socket should be located in a
place where it is always possible to quickly remove the product power cord plug. Always pull the power cord by the plug housing
when unplugging it, never by the cord.
If the power cord or the plug is damaged, immediately disconnect it from the power supply and contact an authorised service
centre of the manufacturer for replacement. Do not use the product with a damaged power cord or plug. The power cord or plug
cannot be repaired and must be replaced with a new one that is free of defects if these components are damaged.
Присоединиться к беседе по данному изделию
Здесь вы можете поделиться тем, что думаете о Lund 67501 Тостер. Если у вас есть вопросы, сначала внимательно прочтите инструкцию. Запросить руководство можно с помощью контактной формы.