Руководство Kärcher K4 Premium Full Control Мойка высокого давления

Руководство

– 7

 Park the appliance on an even surface.

Illustration

 Put the high-pressure hose through the hose guide

from the back.

Illustration

 Push the high pressure hose into the trigger gun

until it locks audibly.

Note: Make sure the connection nipple is aligned

correctly.

Check the secure connection by pulling on the high

pressure hose.

 Unwind the high pressure hose from the hose

drum.

 Insert the mains plug into the socket.

For connection values, see type plate/technical data.

ATTENTION

Impurities in the water can damage the high-pressure

pump and the accessories. For protection, the use of

the KÄRCHER water filter (optional accessory, order

no. 4.730-059) is recommended.

Observe regulations of water supplier.

ATTENTION

Hose couplings made of metal with aquastop can dam-

age the pump! Please use plastic couplings or KÄRCH-

ER brass couplings.

Illustration

 Screw the coupling element to the water connec-

tion on the appliance.

 Attach the water supply hose to the coupling on the

water connection.

 Connect the water supply hose to the water supply.

 Completely open the water tap.

This high-pressure cleaner is suited to work with the

KÄRCHER suction hose with backflow valve (Optional

accessory, order no. 2.643-100) to draw in surface wa-

ter, e.g. from water butts or ponds (see specifications for

max. suction height).

Note: With vacuuming operation, the coupling for the

water connection is not required.

 Fill the suction hose with water.

 Screw the suction hose into the water connection of

the appliance and insert it into the water source

(e.g. rainwater drum).

Bleed the device as follows prior to operation:

 Turn on the appliance “I/ON”.

 Unlock the lever of the trigger gun.

 Push the lever of the trigger gun, the device will

switch on.

 Let the device run (max. 2 minutes) until the water

exits the trigger gun without bubbles.

 Release the lever of the trigger gun.

 Lock the lever of the trigger gun.

ATTENTION

Dry running of more than 2 minutes leads to damage of

the high-pressure pump. If the appliance does not build

up pressure within 2 minutes, switch the appliance off

and proceed in accordance with the instructions in

Chapter "Troubleshooting".

몇 CAUTION

Keep a distance of at least 30 cm when using the jet for

cleaning painted surfaces to avoid damage.

ATTENTION

Car tyres, paint or sensitive surfaces such as wood

should not be cleaned with the dirt blaster, as there is a

risk of damage.

 Select a spray lance suitable for the cleaning task.

Illustration

 Push the spray lance into the trigger gun and fasten

it by a 90° rotation.

 Turn on the appliance “I/ON”.

 Unlock the lever of the trigger gun.

 Push the lever of the trigger gun, the device will

switch on.

Note: Release the lever of the trigger gun; the de-

vice will switch off again. High pressure remains in

the system.

Full Control spray lance Vario Power

 Turn the spray lance until the LED of the required

pressure level is on at the pressure indicator of the

trigger gun.

The pressure indicator on the trigger gun shows the cur-

rently set pressure level during operation with a Full

Control spray lance.

Note: The pressure indicator is not significant during

operation with the T-Racer and other accessories.

ATTENTION

The sensitivity of the materials can strongly differ de-

pending on the age and the condition. The so-called

recommendations are non-binding.

Start up

Water supply

Water supply from mains

Drawing in water from open reservoirs

Operation

High pressure operation

Full Control System

Pressure level For example, recommended for

HARD Stone terraces made of paving

stones or exposed aggregate con-

crete, asphalt, metal surfaces, gar-

den utensils (wheelbarrow, spade,

etc.)

MEDIUM Motorcar / motorcycle, brick sur-

faces, plastered walls, plastic furni-

ture

SOFT Wooden surfaces, bicycles, sand

stone surfaces, rattan furniture

MIX Operation with detergent

13EN

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Kärcher K4 Premium Full Control Мойка высокого давления. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Karcher. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Kärcher K4 Premium Full Control Мойка высокого давления на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Kärcher Мойки высокого давления
Больше руководств Мойки высокого давления

Часто задаваемые вопросы о Kärcher K4 Premium Full Control Мойка высокого давления

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Kärcher KHP 4 Мойка высокого давления

Руководство

Kärcher HD 6/12-4 C Мойка высокого давления

Руководство

Kärcher HD 10/23-4 S Мойка высокого давления

Руководство

Kärcher HD 7/18 C Мойка высокого давления

Руководство

Kärcher HDS 8/17 C Мойка высокого давления

Руководство

Kärcher HD 6/15 CX Plus Мойка высокого давления

Руководство

Kärcher K7 Premium Smart Control Мойка высокого давления

Руководство

Kärcher HD 5/13 CX Мойка высокого давления

Связанные категории