Руководство Kärcher K 4 Compact Мойка высокого давления

Руководство

English 11

5. Switch the device off "0/OFF" during work breaks

longer than 5 minutes.

Finishing operation

몇 CAUTION

Pressure in the system

Injuries from high-pressure water escaping uncontrolla-

bly

Only disconnect the high-pressure hose from the high-

pressure gun or the device when the system is fully de-

pressurised.

1. Release the lever of the high-pressure gun.

2. Close the water tap.

3. Press the lever of the high-pressure gun for 30 sec-

onds.

The pressure remaining in the system is discharged.

4. Release the lever of the high-pressure gun.

5. Lock the lever of the high-pressure gun.

6. Disconnect the device from the water supply.

7. Switch off the device "0/OFF".

8. Pull the mains plug out of the socket.

Transport

몇 CAUTION

Failure to observe the weight

Risk of injury and damage

Be aware of the weight of the device during transporta-

tion.

Carrying the device

1. Lift and carry the device by the carrying handles.

Pulling the device

1. Pull the transport handle out until it audibly latches

into place.

2. Pull the device via the transport handle.

Transporting the device in a vehicle

1. Secure the device against slipping and tipping over.

Care and service

 DANGER

Danger of electric shock

Injuries due to touching live parts

Switch off the device.

Remove the mains plug.

The device is maintenance-free, i.e. you do not need to

perform any maintenance work.

Clean the sieve in the water connection

ATTENTION

Damaged sieve in the water connection

Damage to the device through contaminated water

Check the sieve for damage before inserting it in the wa-

ter connection.

If necessary, clean the sieve in the water connection.

1. Remove the water connection coupling.

2. Pull the sieve out using flat pliers.

Illustration I

3. Clean the sieve under running water.

4. Insert the sieve into the water connection.

Clean the detergent filter

Clean the detergent filter before longer periods of stor-

age.

1. Pull the filter off the detergent suction hose.

Illustration J

2. Clean the filter under running water.

Storage

몇 CAUTION

Failure to observe the weight

Risk of injury and damage

Be aware of the weight of the device during storage.

Storing the device

1. Place the device on a level surface.

2. Disconnect the spray lance from the high-pressure

gun.

3. Press the separation button on the high-pressure

gun and disconnect the high-pressure hose from the

high-pressure gun.

4. Press the casing of the high-pressure hose quick

coupling in the direction of the arrow and pull out the

high-pressure hose.

5. Store the mains connection cable and accessories

on the device.

6. Store the high-pressure hose on the device.

Observe the additional instructions before storing the

device for a longer period of time, see chapter Care and

service.

Frost protection

ATTENTION

Danger of frost

Incompletely emptied devices can be destroyed by frost.

Completely empty the device and accessories.

Protect the device from frost.

The following requirements must be satisfied:

 The device is disconnected from the water supply.

 The high-pressure hose is removed.

1. Switch the device on "I/ON".

2. Wait for a maximum of 1 minute until no more water

escapes from the high-pressure connection.

3. Switch off the device.

4. Store the device in a frost-protected room, together

with all accessories.

Troubleshooting guide

Malfunctions often have simple causes that you can

remedy yourself using the following overview. When in

doubt, or in the case of malfunctions not mentioned

here, please contact your authorised Customer Service.

 DANGER

Danger of electric shock

Injuries due to touching live parts

Switch off the device.

Remove the mains plug.

Device not running

1. Press the lever of the high-pressure gun.

The device switches on.

2. Check that the voltage specified on the type plate

corresponds to the voltage of the power source.

3. Check the mains connection cable for damage.

4. If the motor is overloaded and the motor circuit

breaker has triggered:

a Switch off the device "0/OFF".

b Allow the device to cool down for 1 hour.

c Switch the device on "I/ON" and resume opera-

tion.

Have the device checked by Customer Service if

this fault occurs repeatedly.

The device does not start up, the motor buzzes

Voltage drop due to a weak mains grid or when using an

extension cable

1. When switching on, first press the lever on the high-

pressure gun and then switch on the device "I/ON".

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Kärcher K 4 Compact Мойка высокого давления. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Karcher. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Kärcher K 4 Compact Мойка высокого давления на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Kärcher Мойки высокого давления
Больше руководств Мойки высокого давления

Часто задаваемые вопросы о Kärcher K 4 Compact Мойка высокого давления

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Kärcher K 5.85 M Мойка высокого давления

Руководство

Kärcher K 7 Premium Full Control Plus Мойка высокого давления

Руководство

Kärcher HD 6/15 C Мойка высокого давления

Руководство

Kärcher HD 5/17 C Мойка высокого давления

Руководство

Kärcher K2 Battery Мойка высокого давления

Руководство

Kärcher HDS 8/17 C Мойка высокого давления

Руководство

Kärcher HD 7/18-4 Мойка высокого давления

Руководство

Kärcher HDS 801 D Мойка высокого давления

Связанные категории