Руководство Hitachi DH 36DBL Перфоратор

Руководство

3

English

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another.

Shorting the battery terminals together may cause

burns or a fi re.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, fl ush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

6) Service

a) Have your power tool serviced by a qualifi ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

PRECAUTION

Keep children and infi rm persons away.

When not in use, tools should be stored out of reach of

children and infi rm persons.

CORDLESS ROTARY HAMMER

SAFETY WARNINGS

1. Wear ear protectors

Exposure to noise can cause hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring.

Cutting accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and could

give the operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

2. Never disassemble the rechargeable battery and

charger.

3. Never short-circuit the rechargeable battery.

Shortcircuiting the battery will cause a great electric

current and overheat. It results in burn or damage to the

battery.

4. Do not dispose of the battery in fi re. If the battery is burnt,

it may explode.

5. When using this unit continuously, the unit may overheat,

leading to damage in the motor and switch. Please leave

it without using it for approximately 15 minutes.

6. Do not insert object into the air ventilation slots of the

charger. Inserting metal objects or infl ammables into the

charger air ventilation slots will result in electrical shock

hazard or damaged charger.

7. Bring the battery to the shop from which it was purchased

as soon as the post-charging battery life becomes too

short for practical use. Do not dispose of the exhausted

battery.

8. Before starting to break, chip or drill into a wall, fl oor or

ceiling, thoroughly confi rm that such items as electric

cables or conduits are not buried inside.

9. Ensure that the power switch is in the OFF position. If the

battery is installed while the power switch is in the ON

position, the power tool will start operating immediately,

which could cause a serious accident.

10. Do not touch the bit during or immediately after

operation. The bit becomes very hot during operation

and could cause serious burns.

11. Always hold the body handle and side handle of the

power tool fi rmly. Otherwise the counterforce produced

may result in inaccurate and even dangerous operation.

12. Wear a dust mask

Do not inhale the harmful dusts generated in drilling or

chiseling operation. The dust can endanger the health of

yourself and bystanders.

13. Make sure that the battery is installed fi rmly. If it is at all

loose it could come off and cause an accident.

14. To prevent accidents, make sure to turn the switch off

and pull out the battery before changing accessories,

storing, carrying or when not using the tools.

15. Mounting the drill bit

○ To prevent accidents, make sure to turn the switch off

and pull out the battery.

○ When using tools such as bull points, drill bits, etc.,

make sure to use the genuine parts designated by our

company.

○ Clean the shank portion of the drill bit.

○ Check the latching by pulling on the drill bit.

16. Operate the change lever only when the motor is at a

full stop. Operating the change lever while the motor is

running may cause the tip tool to unexpectedly rotate

and result in an accident. (Fig. 8)

17. Rotation + hammering

DH36DBQL: Using drill bit holder

(standard accessories)

DH36DBML: Using drill bit holder

(standard accessories)

When the drill bit touches construction iron bar, the bit

will stop immediately and the rotary hammer will react

to revolve. Therefore fi rmly tighten the side handle, hold

the body handle and side handles.

18. Rotation only

○ To drill wood or metal material using the drill chuck and

chuck adapter (optional accessories).

DH36DBQL: Using drill chuck holder

(standard accessories)

DH36DBDL: Not using dust extraction unit

DH36DBML: Using drill chuck holder

(standard accessories)

without dust extraction unit

○ Application of force more than necessary will not only

expedite the work, but will deteriorate the tip edge of the

drill bit and reduce the service life of the rotary hammer

in addition.

○ Drill bits may snap off while withdrawing the rotary

hammer from the drilled hole. For withdrawing, it is

important to use a pushing motion.

○ Do not attempt to drill anchor holes or holes in concrete

with the machine set in the rotation only function.

○ Do not attempt to use the rotary hammer in the rotation

and striking mode with the drill chuck and chuck adapter

attached. This would seriously shorten the service life of

every component of the machine.

19. Hammering only

DH36DBQL: Using drill bit holder

(standard accessories)

DH36DBDL: Not using dust extraction unit

DH36DBML: Using drill bit holder

(standard accessories)

without dust extraction unit

20. Do not look directly into the light. Such actions could

result in eye injury.

Wipe off any dirt or grime attached to the lens of the LED

light with a soft cloth, being careful not to scratch the lens.

Scratches on the lens of the LED light can result in

decreased brightness.

The LED light will not light up when installing the dust

extraction unit.

0000Book̲DH36DBL.indb30000Book̲DH36DBL.indb3 2017/03/2917:03:352017/03/2917:03:35

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Hitachi DH 36DBL Перфоратор. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Hitachi. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Hitachi DH 36DBL Перфоратор на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Hitachi Перфораторы
Больше руководств Перфораторы

Часто задаваемые вопросы о Hitachi DH 36DBL Перфоратор

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Kalibr ЭП-1500/36 Перфоратор

Руководство

Sparky BPR 220E Перфоратор

Руководство

Denzel 26620 RHV-1050-38-max Перфоратор

Руководство

Kalibr ЭП- 870/26 Перфоратор

Руководство

Elti ПР-2000М Перфоратор

Руководство

Sparky BPR 280PQCE Перфоратор

Руководство

Redverg RD-RH650 Перфоратор

Руководство

Kalibr ЭП-800 Перфоратор

Связанные категории