English (original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
3
WARNING
To prevent accidental starting that could cause seri-
ous personal injury, always remove the battery pack
from the product when assembling parts.
ATTACHING GRASS DEFLECTOR See Figure 2.
WARNING
Avoid contact with the blade. Failure to avoid contact
can result in serious personal injury.
Invert the string trimmer to access the trimmer head.
Place the guard (b) on to the trimmer head and slide
the guard onto the head by following the track on
the head.
Align the screw holes on the guard with the screw
holes on the trimmer head.
Insert the screws into the trimmer head, fastening
the guard in place.
Place the guard cap (c) on to the guard and slide the
guard cap onto the guard.
Align the screw holes on the guard cap with the
screw holes on the guard.
Insert the screws into the guard, fastening the the
guard cap in place.
WARNING
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufcient to inict serious injury.
WARNING
Always wear eye protection. Failure to do so could
result in objects being thrown into your eyes resulting
in possible serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
The use of attachments or accessories not
recommended can result in serious personal injury.
ATTACHING THE HANDLE See Figure 3.
Unscrew the central knob 'A', remove the cap 'B' and
the lower support 'C', being careful not to lose the
spring in the support.
Place the handle in the lower support and insert the
support pin 'D' in the handle slot 'E'.
Hook the cap 'B' to the lower support 'C' and place
the entire block in its housing on the transmission
shaft.
Set the handle bar in the most comfortable working
position and lock it using knob 'A'.
OPERATION
Hold the product with the right hand on the trigger
handle and the left hand on the left handle. Keep a rm
grip with both hands while in operation. Power head
should be held at a comfortable position with the rear
handle about hip height. Always operate power head
at full throttle. If debris becomes wrapped around the
attachment, RELEASE THE SWITCH TRIGGER, and
remove the debris.
Use the harness when operation.
TO INSTALL BATTERY PACK See Figure 4.
Place the battery pack in the trimmer. Align raised
ribs on battery pack with grooves in the trimmer’s
battery port.
Make sure the latch on bottom of the battery
pack snaps in place and that battery pack is fully
seated and secure in the trimmer before beginning
operation.
TO REMOVE BATTERY PACK See Figure 4.
Release the switch trigger and lock-out trigger to
stop the trimmer.
Press the power button to turn off the trimmer.
Press and hold the battery latch button at the bottom
of the battery pack.
Remove battery pack from the trimmer.
STARTING/STOPPING THE TRIMMER See Figure 5.
To start:
Press the on/off power button.
Depress the lock-out button and squeeze the switch
trigger.
Press high speed button to increase speed
depending upon grass condition. Two LED's will
illuminate above the high speed button indicating
WARNING
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modication is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
Присоединиться к беседе по данному изделию
Здесь вы можете поделиться тем, что думаете о Greenworks GD80BCB Триммер для газона. Если у вас есть вопросы, сначала внимательно прочтите инструкцию. Запросить руководство можно с помощью контактной формы.