Руководство Electrolux EUP84DB Пылесос

Руководство

3www.electrolux.com2www.electrolux.com

13

11

5 6 7 8

15 16

17

9 10

12

1

3 42

14

For models EUP82xxx

UA

GB

FR

AR

BG

GR

NO

CZ

HR

PL

DA

HU

PT

DE

IT

RO

EE

LT

RU

ES

LV

SK

SR

FI

NL

SL

SV

TR

4www.electrolux.com

Electrolux reserves the right to change products, information and

specications without notice.

ENGLISH

Thank you for choosing an Electrolux Ultrapower® vacuum cleaner.

In order to ensure the best results, always use original Electrolux

accessories and spare parts. They have been designed especially for

your vacuum cleaner. This product is designed with the environment

in mind. All plastic parts are marked for recycling purposes.

DESCRIPTION OF ULTRAPOWER®

A. ON/OFF button

B. Power regulation button

C. Locking screw

D. Charging station, wall unit (*

E. Charging station, oor unit (*

F. Charging adapter

G. Fine lter (inner lter)

H. Pre lter (outer lter)

I. Release button, dust container

J. Dust container

(* Not available on models

EUP82xxx

K. Cable protector grill

L. Hatch cover for brush roll

M. Brush roll

N. BRUSHROLLCLEAN® pedal

O. Nozzle front lights

P. Charging indicator

Q. Cli hanger

R. Wall holder *)

S. Charging connector*)

*) Only on models EUP82xx.

BEFORE STARTING

Check that the package includes all parts described in this instruction

manual and read this manual carefully. Pay special attention to the

safety precautions chapter. Save these instructions.

1 Assemble the handle.

For model EUP82xx, use the wall holder *):

2 A) Make sure that Ultrapower® is on a stable and horizontal surface

away from heat sources, direct sunlight or wet places. Attach the wall

holder to the wall 104cm above the oor with a suitable screw and wall

plug. Make sure to use a correct wall plug for the wall.

B) Attach the handle to the wall holder.

C) Connect the charging cable to the back side of the vacuum cleaner.

For all other models:

3 Assemble the charging stand.

4 A) Connect the charging cable to the charge stand.

B) There is a hollow space in the bottom of the charging station where

unused cable can be wound.

C) Position the charging station on a stable and horizontal surface away

from heat sources, direct sunlight or wet places.

5 Insert the adaptor into the mains and charge Ultrapower®. The charging

indicator will be lit when Ultrapower® is on charge.

CHARGING ULTRAPOWER®

6 When fully charged, the charging indicator will blink slowly. The num-

bers of LED lamps will indicate the level of charge. Full charging time is

around 5hours. For better battery performance, charge Ultrapower® for

24hours before rst use and always keep it on charge when not used.

VACUUMING WITH ULTRAPOWER®

Before vacuuming, check that the nozzle wheels and the brush roll are

clean from sharp objects in order to avoid scratching sensitive oors

and to ensure full cleaning performance.

7 Start and stop Ultrapower® by pushing the ON/OFF button. Ultrapow-

er® has 3 power settings which is regulated with the

power regulation

button

.

Ultrapower®

will start on the “High power mode”.

For more silent cleaning and longest run time, press the power regula-

tion button to activate the “Long runtime mode”.

Press the power regulation button one more time to activate the “Nor-

mal cleaning mode”.

BRUSHROLLCLEAN® FUNCTION

Use the BRUSHROLLCLEAN® function to keep the brush roll clean and

free from hair and bres. For best results use the BRUSHROLLCLEAN®

function when

Ultrapower®

is fully charged.

8 Place Ultrapower® on a hard and at surface. Do not use the BRUSH-

ROLLCLEAN

®

function on carpets.

Press the BRUSHROLLCLEAN

®

pedal with your foot while the cleaner is

on. Hold for 5 seconds until hairs and bres are removed. There will be

a cutting noise during this process, this is normal. If hairs remain on the

brush roll, repeat the process.

The BRUSHROLLCLEAN

®

function is equipped with an overheating

protection. If the BRUSHROLLCLEAN

®

function has been used for more

than 30 seconds (constant or interrupted) it will deactivate the brush

roll and turn o the nozzle front lights. The vacuum cleaner can still be

used, even when the BRUSHROLLCLEAN

®

function is deactivated. To re-

activate the BRUSHROLLCLEAN

®

function, place Ultrapower® on charge

and charge for 15minutes.

Please note that the BRUSHROLLCLEAN® function might not be able to

remove thicker threads or wires that are caught in the brush roll.

EMPTYING OF THE DUST CONTAINER

9 Remove the dust container by pressing the button.

10 Take out the lters from the dust container by pressing the release but-

tons.

Empty the contents into a dustbin. Never wash the dust container

or lters in a dishwasher.

IMPORTANT - FILTER CLEANING!

11 The lters must be cleaned at regular intervals to ensure a high clean-

ing performance.

Take out the lters by pressing the release buttons.

Separate the inner lter from the outer lter.

12 Rinse the lter parts carefully under lukewarm water without using any

detergents. (Never use the dishwasher or washing machine.) S

hake to

remove excess water and leave to dry minimum 12h before putting

them back into the cleaner.

CLEANING THE HOSE AND NOZZLE WHEELS

13 Loosen the hose behind the nozzle from its upper connection. Remove

any object or debris that can be blocking the airow in the hose or in

the air channel to the dust cup, and put the hose back.

14 If the wheels need to be cleaned or get jammed, remove them carefully

by using a at screwdriver.

REMOVING AND CLEANING THE BRUSH ROLL

15 If the brushroll gets blocked Ultrapower® will stop. Open the cable

protector grill and the brush roll hatch cover and remove the brush roll.

16 Us

e a pair of scissors to remove threads etc. Reassemble the brush roll,

making sure it can spin freely.

REMOVING THE BATTERIES FOR RECYCLING

Warning; Battery removal must only be done by an Electrolux

service center or ocial collection point!

17 Only remove batteries if the product is to be scrapped. Improper

handling of the batteries may be hazardous. Batteries should always

be completely discharged before removal.

Take your product to an

Electrolux service center or ocial collection point for recycling. They

can remove and recycle the battery and electric parts in a safe and pro-

fessional way

.

Follow your country’s rules for collection of rechargeable

batteries and electrical products.

Enjoy a great cleaning experience with Ultrapower®!

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Electrolux EUP84DB Пылесос. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Electrolux. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Electrolux EUP84DB Пылесос на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Electrolux Пылесосы
Больше руководств Пылесосы

Часто задаваемые вопросы о Electrolux EUP84DB Пылесос

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Electrolux EFP71525 UltimateHome 700 Пылесос

Руководство

Electrolux PQ92-3EMF Pure Q9-P Пылесос

Руководство

Electrolux WQ61-1OGG Пылесос

Руководство

Electrolux EP81AB25UG Пылесос

Руководство

Electrolux Z5650 Пылесос

Руководство

Electrolux EP81U25ULT Пылесос

Руководство

Electrolux EFS71423 UltimateHome 700 Пылесос

Руководство

Electrolux EFP71522 UltimateHome 700 Пылесос

Связанные категории