Руководство Cramer 82PST Цепная пила

Руководство

3

cramer.eu

EN

• Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

Electrical safety

• Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock. Please note that rain, fog

and other humidity can vary in intensity and the equipment can not be used

in extreme conditions. Keep batteries away from saline environment and

contaminated liquids. After use, the battery and the device are to be dried.

Personal safety

• Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or medication. A lapse of attention

while operating power tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat

or hearing protection used appropriately will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off position

before connecting to power source and/or battery pack and when picking

up or carrying the tool. Carrying power tools with your finger on the switch or

energizing power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool

on. A wrench or a key left attached to a rotating part of the power tool may

result in personal injury.

• Do not over-reach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used. Use

of dust collection can reduce dust-related hazards.

Power tool use and care

• Do not force the power tool. Use the power tool for the application.

The correct power tool will do the job better and safer at the rate for which

it was designed.

• Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and

must be repaired.

• Disconnect the plug from the power source and/or the battery pack

from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures

reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

• Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools

with sharp cutting edges are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc.in accordance with

these instructions, taking into account the working conditions and the

work to be performed. Use of the power tool for operations different from

those intended could result in a hazardous situation.

• When not in use, store the machine out of the reach of children. Make

sure to store the product indoors, in a dry place.

Battery tool use and care

• Recharge only with the charger specied by the manufacturer. A

charger that is suitable for one type of battery pack may create a risk of fire

when used with another battery pack.

• Use power tools only with specically designated battery packs. Use

of any other battery packs may create a risk of injury and fire.

• When battery pack is not in use, keep it away from other metal

objects like paper clips, coins, keys, nails, screws, or other small metal

objects that can make a connection from one terminal to another.

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Cramer 82PST Цепная пила. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Cramer. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Cramer 82PST Цепная пила на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Cramer Цепные пилы
Больше руководств Цепные пилы

Часто задаваемые вопросы о Cramer 82PST Цепная пила

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Cramer 82CS15 Цепная пила

Руководство

Cramer 82CS25 Цепная пила

Руководство

Cramer 82PS Цепная пила

Руководство

Redverg EC-1550 Цепная пила

Руководство

Champion A237-16 Цепная пила

Руководство

Champion A241-16 Цепная пила

Руководство

Champion CSB360 Цепная пила

Руководство

Husqvarna 225i Цепная пила

Связанные категории