Руководство Cata TT 603 Варочная поверхность

Руководство

THIS APPLIANCE IS DESIGNED FOR DOMESTIC USE

ONLY. THE MANUFACTURER SHALL NOT IN ANY

WAY BE HELD RESPONSIBLE FOR WHATEVER IN-

JURIES OR DAMAGES ARE CAUSED BY INCORRECT

INSTALLATION OR BY UNSUITABLE, WRONG OR

ABSURD USE.

The manufacturer declares that this product meets

all basic requirements regarding low-voltage elec-

trical equipment established in the 2006/95/EEC Di-

rective of 12 December 2006 and electro-magnetic

compatibility established in 2004/108/EEC Directive

of 15 December 2004.

User’s Instructions

Installation

All operations relative to installation (electric con-

nection) should be carried out by skilled personnel in

conformity with the rules in force.

As for the specific instructions see part pertaining to

installer.

Use

TOUCH CONTROL HEATING ELEMENTS

Touch sensitive keys

All operations can be performed using touch sensitive

keys (capacitive sensors) located on the front of the

control board; each key has a corresponding display.

All actions are confirmed by an audible signal.

TOUCH CONTROL (Fig. 2)

1 ON / OFF

2 Minus -

3 Plus +

4 Double / Triple Circuit

5 Cooking zone

6 Setting level display

7 Dual circuit pilot light

8 Illuminated Segment Multiple Circuits

Installation

All operations relating to installation (electrical con-

nection) must be carried out by qualified personnel in

line with current regulations.

See the part reserved for fitters for specific instructions.

Switching the Touch Control on/off

After mains voltage is applied, the touch control

initialises for approximately one second before it is

ready for use.

All displays and LEDs flash for approximately one se-

cond after resetting. Once this period is complete, all

displays and LEDs switch off and the touch control is

in standby mode.

Press the ON/OFF (1) button to switch the touch con-

trol on.

The cooking zone displays indicate “0“. If a cooking

zone is in “hot“ (high temperature) mode, the display

will alternately indicate “H“ and “0“.

After switching the touch control on, it will remain

active for 20 seconds. If no cooking zone is selec-

ted, the touch control automatically switches back to

standby mode.

The touch control can only be switched on by pres-

sing the ON/OFF (1) button.

Pressing the ON/OFF (1) button at the same time as

other buttons will have no effect and the touch con-

trol will remain on standby.

The touch control can be switched off at any time

using the ON/OFF (1) button. This is even the case

when the control has been locked by the child safety

feature.

The ON/OFF (1) button always takes priority in the

switching off function.

Automatic off

Once switched on, the touch control automatica-

lly switches off after 20 seconds of inactivity. After

selecting a cooking zone, the automatic off time is

divided into 10 seconds, after which the zone is de-

selected and, after another 10 seconds, the touch

control switches off.

Switching a cooking zone on/off

If the touch control is switched on, the cooking zone

can be selected by pressing the button (5) of the co-

rresponding zone.

The display (6) of the zone selected lights up, while

the remaining displays are dimmed. if the cooking

zone is “hot”, “H” and “0” are alternately displayed.

Press the PLUS (3) or MINUS (2) button to select a

setting and the zone will begin to heat up.

Once the cooking zone has been selected, the setting

can be selected by keeping the PLUS (3) button pres-

sed down. The setting begins at level 1 and increases

GB

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Cata TT 603 Варочная поверхность. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Cata. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Cata TT 603 Варочная поверхность на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Cata Варочные поверхности
Больше руководств Варочные поверхности

Часто задаваемые вопросы о Cata TT 603 Варочная поверхность

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Cata CI 6021 BK Варочная поверхность

Руководство

Cata T 604 Варочная поверхность

Руководство

Cata GIB 6004 X Варочная поверхность

Руководство

Cata TD 6003 BK Варочная поверхность

Руководство

Cata RCI 631 BK Варочная поверхность

Руководство

Cata IB 6021 BK Варочная поверхность

Руководство

Cata GIGA 600 BK Варочная поверхность

Руководство

Cata LCI 9041 BK Варочная поверхность

Связанные категории