Руководство Brevi Booster Plus Автомобильное кресло

Руководство

8

car seat in the car, make sure that during use none of its components is blocked by any movable part of the

seat or the door of the car. Adjust the height of the car seat according to the height of the child to ensure that

the belt is positioned correctly (Pics. 3, 4, 5). Check that the back of the car seat is perfectly locked to the

seat body using the appropriate fixing guide on the back. This version can be used until the weight of the

child exceeds 25 kg. After this you must use the seat-body version. In this case release the back, rotating it

and pulling it out from the appropriate fastening guide. To replace the back, repeat these operations in rever-

se order. The Fuego car seat comes complete with a seat, a back, and a headrest,and is suitable for

children weighing less than 25 kg. From 15 kg to 36 kg the “seat-body” solution is best. In this case it

is sufficient to release the back, rotating it and pulling it out from the appropriate fastening guide (Pic. 6). To

replace the back, repeat these operations in reverse order.

Warning: the car seat must never be installed on the seat of the car in the reclined position.

Place the car seat in the car so that the back of the car seat body is hard against the back of the vehicle

(Pic.7). Make sure that the strap of safetybeltretainer does not remain under the car seat. Place the child on

the car seat checking that the safety belt isn’t twisted and pass the abdominal part of the belt under the arms

to restrain the child’s pelvis correctly. Fasten the buckle and ensure that any slackness of the belt is taken

up by the self-rewinding mechanism. Fix the car seat with the safety belt pulled tightly. Push the webbing

retainer to the child’s shoulder where the diagonal belt of the vehicle is passing. Feed the diagonal portion

of the seat belt through the seat belt retainer A (Pic.5) Pull the harness adjustment strap to pull the seat belt

away from the child’s face and neck.

CLEANING THE CAR SEAT

Consult the fabric label sewn onto the product for washing instructions.

To clean the plastic parts of the car seat, simply rub them with a damp cloth.

Do not use solvents.

Protect the product from environmental elements, water, rain or snow; longer sun exposition can cause

variation in colour in many fabrics.

Keep the product in a dry place.

SAFETY REGULATIONS

No modification or addition can be made to the car seat without specific approval of qualified authorities.

Any alteration to this product may mean it will no longer function correctly and will no longer be safe.

Failure to observe these rules can cause serious danger in the use of the car seat. In these cases the

manufacturer declines all responsibility. The car seat must be secured by the safety belt even when the child

is not in it. The car seat must be replaced after an accident. The violent stresses to which it is subjected in

these cases can alter its structure and solidity, thus compromising its safety. Do not allow the car seat to get

too hot by exposing it to the sun’s rays. Do not leave the child unattended in the car seat, inside the car.

When travelling, check periodically that the car seat and child are positioned correctly and that the belt is

fastened and tight. When travelling, do not leave unsecured objects or luggage inside the car. In the event

of an accident these could cause injuries.

IMPORTANT ADVICE

Follow the instructions in the order shown and become familiar with the Fuego Sprint before installing it

in your car. Failure to do so may be dangerous. Ensure that the Fuego Sprint is not damaged because of

problems with the folding seat or with the car door. Before each trip, be sure to adjust the safety belt of the

car according to the clothes the child is wearing. A belt adjusted for winter clothing, for example, will be too

loose for a child wearing summer clothes.Cover the Fuego Sprint if your car is left in the sun, since the metal

and plastic parts can cause burns when touched and the covering may bleach.

Be sure to lift the Fuego Brevi holding both the seat and the back at the same time.

Do not lift it only by the back or the headrest.

Keep the Fuego Brevi in a safe place when not in use. Do not place heavy objects on it and don’t put it near

heat sources such as radiators.

Keep it locked even when not in use.

Do not use Fuego Sprint with the abdominal belt alone.

Do not use Fuego Sprint facing backwards.

Do not use Fuego Sprint in the house, only in the car.

GB

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Brevi Booster Plus Автомобильное кресло. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Brevi. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Brevi Booster Plus Автомобильное кресло на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Brevi Автомобильные кресла
Больше руководств Автомобильные кресла

Часто задаваемые вопросы о Brevi Booster Plus Автомобильное кресло

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Brevi Kio-S Автомобильное кресло

Руководство

Brevi Axo Автомобильное кресло

Руководство

Brevi Tazio TT Автомобильное кресло

Руководство

Brevi Smart Silverline Автомобильное кресло

Руководство

Brevi Lewis Автомобильное кресло

Руководство

Brevi Tao b.fix Автомобильное кресло

Руководство

Brevi Grand Prix Автомобильное кресло

Руководство

Brevi Kio Автомобильное кресло

Связанные категории