Руководство Braun BP5900 ExactFit 5 Тонометр

Руководство

8

9

Morning average (for BP5900 only)

• Press the “average ” (3) button again into “morning

average

” mode, the morning measurements

in memory within past 7 days will show on LCD.

• If there is no data in memory within past 7

days, “

” will show on LCD.

Evening average (for BP5900 only)

• Press the “average ” (3) button once again into “evening

average

” mode, the evening measurements in memory

within past 7 days will show on LCD.

• If there is no data in memory within past 7 days, “

” will

show on LCD.

Erasing data

• Press the “memory

M

” (2) button into memory mode.

• Press and hold the “mode

” (5) button and then press the

“set

” (4) button, all the stored data will be erased and

CLR will show on screen.

• To check if the data was erased, press the “memory

M

” (2)

button. No data should show up on screen, but date, time

and M:00.

Morning hypertension setting (for BP5900 only)

Morning hypertension symbol will appear when morning average is above your

pre-congured systolic rate and/or pre-congured diastolic rate, and/or one or both of

these measurements is 20% or more above evening average.

** Your pre-congured Systolic / Diastolic should be decided

between you and your doctor or healthcare provider.

• After setting date and time, press “mode

” (5) button into

“morning hypertension

” setting mode “- - ” on systolic

position will ash for systolic setting.

• Press “set

” (4) button, LCD will appear 135 mmHg for SYS

as the internal pre-set value, then press “set

” button

repeatedly to set his own value (range from 70~250 mmHg)

• Press “Mode

” (5) button again into “morning hypertension

” setting mode “ - - ” on diastolic position will ash for

diastolic setting.

• Press “set

” (4) button, LCD will appear 85 mmHg for DIA

as the internal pre-set value, then user presses “set

”

button to set his own value (range for DIA is 40 ~ 115 mmHg).

• User can press start/stop

(1) button to exit setting mode

and go back to standby at any step.

Irregular heart beat detector (for BP5900 only)

The appearance of this symbol signies that a certain pulse irregularity was detected

during the measurement. Talking, moving, shaking or an irregular pulse during the

measurement can result in the appearance of this icon. Usually this is not a cause for concern,

however if the symbol appears often, we recommend you seek medical advice. The device does

not replace a cardiac examination, but service to detect pulse irregularities at an early stage.

Low battery indicator

When the low battery indicator ashes on the display, it means the battery is low and

the four batteries need to be replaced with alkaline LR6 (AA) batteries.

**

After replacing batteries, BPM will go into time-setting mode automatically and show the

last measurement time on screen. please set the current date / time before taking the next

measurement to get correct average result.

Storage and cleaning

• Always keep the unit in the carrying case after its use.

• Do not put the item directly under the sunlight, in high temperature or humid and dusty

places.

• Do not store in extremely low (less than -20°C) or high (more than 60°C) temperature.

temperature.

• Use a piece of cloth with water or mild cleansing agent to clean the case and then use a piece

of dry cloth to wipe it dry. Use a piece of dry cloth to wipe the cu when it is dirty.

• Do not use any strong cleansers to clean it.

• When the unit is not to be used for a long time, remove the batteries.

(Batteries may leak or cause harm).

What to do if …..

Problem Reason Solution

Heart rate

symbol

Appears in the measurement

condition and ashes when

pulse is detected.

• Measurement in progress, remain quiet.

Low battery

indicator

Appears when the battery

voltage is excessively low or

the positions of the batteries

are incorrect.

• Replace all four batteries with new ones.

Insert the batteries in the correct

positions. Be aware of +/- positions.

Measuring

error

Appears when the accurate

blood pressure and pulse

could not be obtained.

• Press “start/stop” button again and

remeasure.

• Check if cu is wrapped

according to instructions.

• Check that there are no kinks in tube.

• Check palm if exerting eort.

• Check if talking or moving

during measurement.

• Check if posture is correct.

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Braun BP5900 ExactFit 5 Тонометр. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Braun. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Braun BP5900 ExactFit 5 Тонометр на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Braun Тонометры
Больше руководств Тонометры

Часто задаваемые вопросы о Braun BP5900 ExactFit 5 Тонометр

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Braun BP6000 ExactFit 3 Тонометр

Руководство

Braun BP6200 ExactFit 5 Тонометр

Руководство

Braun BP6100 ExactFit 3 Тонометр

Руководство

Braun BP4900 ExactFit 3 Тонометр

Руководство

Braun BP4600 ExactFit 3 Тонометр

Руководство

Beurer BM 53 Тонометр

Руководство

Microlife BP B2 Basic Тонометр

Руководство

Rossmax CF155f Тонометр

Связанные категории