Руководство AKO WW 201 E Обогреватель

Руководство

4

Installation and Operating Instructions

Radiant panel heater WW 101/151/201 E

1. Important Information

Keep these instructions in a safe place and pass them on to

possible future owners.

• Use device for room heating within enclosed rooms only.

• Repairs and corrective measures may only be carried out by

a qualified technician.

• Disconnect the power supply in the event of fault (discon-

nect the device plug or switch off the fuse).

• Do not use this device next to a bathtub, shower, washbasin

or swimming pool.

• The device carries the symbol shown on the right,

which indicates that the heating device must under

no circumstances be covered with any objects.

• Caution! The outer surfaces of the device, and in

particular the air outlet grid, become hot during operation.

• Children or persons who are not capable of operating the

heating device safely must not operate it. Ensure that child-

ren do not play with the device.

• Caution! Potential dangers can arise when the device swit-

ches on automatically, e.g. devices which have been cover-

ed or blocked by objects since they were last used could

cause fires.

• The heating device must not be operated in rooms where

highly flammable substances are used (e.g. solvents, etc.).

• Do not lay the connecting cable across the hot device.

2. Installation

The heating device may only be installed as shown, i.e. on a

horizontal, even surface. Use on deep-pile carpets is not per-

mitted. Please exercise caution when installing it in front of

flammable objects. Installation below a wall socket is not per-

missible. Minimum clearances must be observed.

In addition, a minimum clearance of 500 mm must be maintai-

ned between flammable objects e.g. curtains, towels or heat-

sensitive plastics and the front of the unit.

Use in the bathroom

Use the device such that it is not possible for someone in the

bath or shower to touch the control elements.

In accordance with VDE 0100 Part 701, the device must not be

fitted in protected zones 0 and 1. The device must receive its

power supply via a protective residual current device (FI).

Installation of the supporting feet

Do not operate the heating device without the feet supplied

being fitted.

Model WW 101 E is supplied without casters.

Supporting feet, casters and the

two fixing screws are provided

loose.

Screw down supporting feet as

shown and attach casters if re-

quired.

Wall mounting

The heating device must be ali-

gned horizontally and installed on

a vertical wall (see illustration).

Make sure that the inflow and out-

flow of air at the top and bottom of

the device are unimpeded

.

- Drill fixing holes for the two wall

brackets at distance "A" and

plug.

- Screw down wall brackets and

attach heater.

3. Electrical Connection

The voltage specified on the type plate must match the local

mains voltage.

If the power cord of this device is damaged, it must be replaced

by the manufacturer, the manufacturer's after-sales service or

a similarly qualified person, in order to prevent risks.

The device plug must always be accessible. In order to avoid

hazards due to inadvertent resetting of the thermal cut-out, this

appliance must not be supplied through an external switching

device, such as a timer, or connected to a circuit that is regu-

larly switched on and off by the utility company.

Model WW 101 E WW 151 E WW 201 E

Dimension A 286 mm 486 mm 686 mm

Dimension B 635 mm 835 mm 1035 mm

GB

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего AKO WW 201 E Обогреватель. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с AKO. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего AKO WW 201 E Обогреватель на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для AKO Обогреватели
Больше руководств Обогреватели

Часто задаваемые вопросы о AKO WW 201 E Обогреватель

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

AKO H 500 TSD Обогреватель

Руководство

AKO HC 200 TS Обогреватель

Руководство

AKO HC 210 TSD Обогреватель

Руководство

AKO WW 101 E Обогреватель

Руководство

AKO WW 151 E Обогреватель

Руководство

AKO H 390 TS Обогреватель

Руководство

Alteco GH-40 Обогреватель

Руководство

Вортиче Microrapid T V0 Обогреватель

Связанные категории