Руководство Adler AD 2849 Машинка для стрижки волос

Руководство

6

Before first use:

1. Using a damp cloth, wipe all accessories and surfaces of the device.

Using the device:

1. Press the power button (3). If the device does not turn on immediately there are 2 options:

a. The device is discharged. Go to the section of the manual marked charging.

b. The device has a travel lock on. Go to the section of the manual labeled travel lock.

2. With the power button (3) you can: turn on the device, change the device mode to turbo speed, turn off the device.

In this order.

3. On the display you can see the current state of charge (4A), Need to Charge if the icon is lit you should connect the

device to charge (4B), setting of higher speed turbo mode (4C), current state of travel lock (4D).

4. With the help of the cutting length adjustment ring (3), you can change the cutting length without attachments. Turn

the ring to the left to achieve a shorter cut and to the right to increase the length.

5. You can also apply length combs (I) to the device. Once the combs are applied, you can also change the cutting

length with the length adjustment ring (3).

Charging:

1. After discharging or using, charge the device. To do this, connect the charging cable (A) to the power input (5).

2. And then to a power source with output voltage: 5V DC 1A.

3. The display will show the current degree of charge (4A). When the device reaches 100%, it will stop charging and

should be disconnected from the power supply.

Travel lock:

The device has a travel lock which deactivates the control button before accidentally turning on the device and

discharging the battery. To disable this feature or enable it:

1. Press and hold the on/off button (3) for 4 seconds.

2. Depending on the current state of the device, either the lock will be enabled or disabled.

Description of accessories:

B. Daily combing brush is used for regular combing of pets with medium and short hair. It should be used regularly on

dry hair to separate individual hairs and prevent the formation of pods and tangles.

C. Straight scissors are used for trimming and shaping the entire style and trimming the hair on the paws.

D. Shading scissors are used to finish the styling by giving a natural look to the style. They should be used at the end

of the haircut.

E. Claw clippers. When trimming claws, shorten, the hard tip of the claw, avoiding the part that does not have a

matrix, which is heavily blooded and innervated, and cutting it causes pain and bleeding. In cats, only the white hard

tip of the claw should be shortened, the shortening should not exceed 1-2 mm with each treatment, which allows to

achieve the optimal length without the risk of damaging the matrix. In dogs, only the ends of the claws should be cut,

depending on the breed, about 1-2 mm per cut. The goal is to shorten the claw so that it does not touch the ground, but

keeping a gap of about 1 mm from the matrix to avoid bleeding and pain. The frequency of trimming depends on the

individual claw growth rate, but a general rule of thumb is that it should be done every 2-4 weeks or so.

G. Claw file, To use a claw file properly, especially in dogs, it is necessary to proceed step by step. First, it's a good

idea to get your pet used to the touch of the file, starting with the devices off, rewarding each approach and touch of

the claw. Once accustomed, you can move on to a combination of sound and touch, and then to holding the paw in

your hand and starting to file.

Sawing should be done gently, always in one direction - from the top to the bottom of the claw - to avoid splitting the

nail. Control the pressure to avoid damaging the claw and touching the sensitive, blood-bearing part (the core).

H. Shearing comb. The comb has 2 parts, with wider spacing between the teeth and smaller spacing depending on your

needs, you can use them alternately. The comb is mainly used to comb out tangles as well as to lift tangles from the

skin to cut and remove them.

Maintenance:

1. The blades should be cleaned of any remaining hair after each use.

2. Sprinkle the blades with machine oil every few uses.

3. If hair gets inside the razor, securely grasp the razor with one hand and the tip of the stationary blade with the other

and pull the blade away from the device. It will pop out and you can then proceed to clean and oil the inside of the

device. CAUTION: Do not pour too much oil. This will cause hair to accumulate inside the device and require more

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Adler AD 2849 Машинка для стрижки волос. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Adler. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Adler AD 2849 Машинка для стрижки волос на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Adler Машинки для стрижки волос
Больше руководств Машинки для стрижки волос

Часто задаваемые вопросы о Adler AD 2849 Машинка для стрижки волос

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.