Руководство Hama 00011413 8in1 Пульт дистанционного управления

Руководство

5.2.3 Select the device you want to control using

the device key (e.g. TV). A successful selection

is indicated by the LED with one flash follo-

wed by permanent light.

5.2.4 Press the “POWER” or the PROG+/PROG- key

to zap through the preloaded codes until the

device you want to control reacts.

5.2.5 Press MUTE(OK) to save the code and exit the

code search. The LED indicator turns off.

Note

► Internal memory limitations allow only up to

350 most common device codes to be pre-

loaded. Due to the extensive number of

different available A/V devices on the mar-

ket, it may be possible that only the most

common main functions are available. If so,

repeat steps 5.2.1 to 5.2.5 to find a more

compatible code. No code may be available

for some special device models.

5.3 Auto Code Search

Auto Code Search uses the same preloaded codes

as the Manual Code Search (5.2) but your Universal

Remote Control scanns through the codes automa-

tically until the device you want to control shows

a reaction. This might be that the device you want

to control switches off (POWER key) or changes the

channel (P+/P- keys).

5.3.1 Turn on the device you want to control

5.3.2 Press the SETUP key until the LED indicator is

permanently lit.

5.3.3 Select the device you want to control using

the device key (e.g. TV). A successful selection

is indicated by the LED with one flash follo-

wed by permanent light.

5.3.4 Press the PROG+/PROG- keys or POWER to

start the Auto Code Search. The LED indicator

flashes once followed by permanent light.

The Universal Remote Control has a latency of

6 seconds before the first scan starts.

Note: Scan Speed Settings

► Scan Speed Settings can be set at either 1 or

3 seconds. The default setting for the scan

time per single code is 1 sec. If this feels un-

comfortable , you can switch to 3 sec. scan

time per single code. To switch between the

scan times, press PROG+ or PROG- during

the 6 sec. latency before Auto Code Search

starts scanning.

5.3.5 The LED indicator confirms each single code

scan with a single flash.

5.3.6 Press MUTE(OK) to save the code and exit the

code search. The LED indicator turns off.

5.3.7 To stop the Auto Code Search during the scan

process, press the EXIT key.

Note

► When all codes are searched without suc-

cess, the Universal Remoote Control exits

Auto Code Search and returns to operational

mode automatically. Currently stored code

is not changed.

5.4 Code Identification

The Code identification offers you the possibility, to

determine an already entered code.

5.4.1 Press the SETUP key until the LED indicator is

permanently lit.

5.4.2 Select the device you want to control using

the device key (e.g. TV). A successful selection

is indicated by the LED with one flash follo-

wed by permanent light.

5.4.3 Press SETUP key. The LED indicator flashes

once followed by permanent light.

5.4.4 To find the first digit, press the numeric keys

from 0 to 9. The LED indicator flashes once

to indicate the first digit of the 4-digit code

number.

5.4.5 Repeat step 5.4.4 for the second, third and

fourth digit.

CODES

TV VCR SAT DVD

AUX AMP CBL DVBT

6. Special Functions

6.1 Punch Through Channel

The Punch Through Channel allows the PROG+ or

PROG- commands to bypass the currently controlled

device and switch the channels on a second device.

All other commands remain uninfluenced.

To activate the punch through channel setting:

• Press desired device mode key (e.g. TV).

• Press and hold “PROG+” key.

• Press desired device mode key (e.g. SAT).

• Release “PROG+” (the indicator flashes once if

the setting is activated).

To deactivate the punch through channel setting:

• Press desired device mode key (e.g. TV).

• Press and hold “PROG-” key.

• Press desired device mode key (e.g. SAT).

• Release “PROG-” (the indicator is flashing twice

if the setting is deactivated).

6.2 Punch Through Volume

The Punch Through Volume allows the VOL+ or

VOL- commands to bypass the currently controlled

device and adjust the volume on a second device.

All other commands remain uninfluenced.

To activate the punch through volume setting:

• Press desired device mode key (e.g. TV).

• Press and hold “VOL+” key.

• Press desired device mode key (e.g. SAT).

• Release “VOL+” (the indicator flashes once if

the setting is activated).

To deactivate the punch through volume setting:

• Press desired device mode key (e.g. TV).

• Press and hold “VOL-” key.

• Press desired device mode key (e.g. SAT).

• Release “VOL-” (the indicator is flashing twice if

the setting is deactivated).

6.3 Macro Power

Macro Power enables you to turn two A/V devices

on/off simultaneously.

To activate the macro power setting:

• Press desired device mode key (e.g. TV).

• Press and hold “POWER” key.

• Press desired device mode key (e.g. SAT).

• Release “POWER” (the indicator flashes once if

the setting is activated).

To deactivate the macro power setting:

• Press desired device mode key (e.g. TV).

• Press and hold “POWER” key.

• Press desired device mode key (e.g. SAT).

• Release “POWER” (the indicator is flashing

twice if the setting is deactivated).

7. Maintenance

• Do not mix new and used batteries for

powering the Universal Remote Control, as old

batteries tend to leak and may cause power

drain.

• Do not use corrosive or abrasive cleansers on

your Universal Remote Control.

• Keep the Universal Remote Control dust free by

wiping it with a soft, dry cloth.

4

5

00011412man_cs_de_el_en_es_fi_fr_hu_it_nl_pl_pt_ro_ru_sk_sv_tr.indd 5 02.09.14 15:43

Рейтинг

Подробнее об этом руководстве

Мы понимаем, что приятно иметь бумажное руководство для вашего Hama 00011413 8in1 Пульт дистанционного управления. Вы всегда можете скачать инструкцию с нашего сайта и распечатать самостоятельно. Если вы хотите получить оригинальное руководство, мы рекомендуем вам связаться с Hama. Возможно, они смогут предоставить оригинальное руководство. Вы ищете руководство для вашего Hama 00011413 8in1 Пульт дистанционного управления на другом языке? Выберите предпочитаемый язык на нашей домашней странице и найдите номер модели, чтобы узнать, есть ли она у нас в наличии.

Технические характеристики

Все инструкции для Hama Пульты дистанционного управления
Больше руководств Пульты дистанционного управления

Часто задаваемые вопросы о Hama 00011413 8in1 Пульт дистанционного управления

Наша служба поддержки выполняет поиск полезной информации по изделиям и отвечает на часто задаваемые вопросы. Если вы заметили неточность в наших часто задаваемых вопросах, сообщите нам об этом с помощью нашей контактной формы.

Сопутствующие товары

Руководство

Hama 00012307 8in1 Пульт дистанционного управления

Руководство

Hama 00012306 4in1 Пульт дистанционного управления

Руководство

Hama 00040074 6in1 Пульт дистанционного управления

Руководство

Hama 00040072 Big Zapper Пульт дистанционного управления

Руководство

Hama 00012086 3in1 Пульт дистанционного управления

Руководство

Hama 00011412 4in1 Пульт дистанционного управления

Руководство

Vivanco Viv.Control 5 Пульт дистанционного управления

Руководство

One For All URC 1280 Contour 8 Пульт дистанционного управления

Связанные категории